• Toy
• Decoration
• Phone stand
• Keyring

If you want to sell prints of this models you can buy a Commercial license (for life) Check a LinkTree in my bio Or join my Commercial Plan where you can sell prints of all of my models on Thangs

A lot of versions to print

• Solid - easiest to print
• Parts - to be printed in separate parts in different colors
• Multi - combined with SOLID for multicolor printers

There are full body models and with a space for a phone (8-16mm thickness - as in file names and on the bottom of models) Phone will be at 12 dgr angle. Should work with horizontal and vertical placing (tested with 12mm phone with 12 and 14mm reindeer versions)

To resize the models use the equasion: 'Needed space (in milimeters)' divided by 'model number' multiplied by 100% = 'Needed model size in percent' For example if you need more stable 16mm you can take 10mm version resized to: 16 / 10 * 100% = 160%

I think that the Reindeer shouldn't be used by smaller kids (0-3yo) Antlers may break. It will be too small to choke but still...

KEYRING To make a keyring use a model of your choice and add a Reindeer_KEYRING-addon Both models should be in the exact same position in your slicer to be sure that they will merge properly Then select both models and merge them (right click menu) Keyring models are with a 'frame', a flat surface that will not be printed. This way it is easy to set it in the right spot - Ignore model 'errors' and DO NOT try to 'fix' the model After merging you can easly resize or rotate the model if needed

Model printed in parts has separate back hooves model with a keyring - no need to use an addon

On multicolor prints a KEYRING-addon should be highier on the list than xMULTI_dark-brown and lower than SOLID Use the same color as hooves (dark-brown)

EYES The same as a keyring Reindeer_PARTS_eyes-addon can be used with Reindeer_PARTS This model adds eyes like in SOLID model, instead of holes for filament

MULTI Use SOLID model of your choice and add xMULTI models to the same place. Then merge all 3 files together The easiest way is to just select all 3 files and move them to the slicer and click YES when asked if it's a single model with multi parts - they will be merged automaticly

SOLID should be first on the objects list, then optional KEYRING-addon and then the xMULTI models

Default color for body is brown but chose what you want 'dark-brown' is with antlers, front and back hooves and eyes 'red' is with a nose only

Models are with an 'outline', flat model that will not be printed

PARTS After assembling parts should stay in place You will hear a 'click' sound when it's pushed all the way

For eyes you need few mm of filament (preferably a black one) If you don't want to do this (may be difficult) you can leave holes like it is (as on few models on photos) or print it with Reindeer_PARTS_eyes-addon to fill the holes (merge addon with the body)

Pliers may be usefull for assembling, especially with eyes and antlers

Hooves are symetrical so it doesn't matter what will go to the left and what to right Back hooves are bigger than front ones

I printed antlers and all hooves together in one print

Printing tips No supports needed Use some infill, I printed with 10% gyroid 0.2mm layer height or less (0.1mm on photos) 2 walls or more (3 walls for keyrings works well)