Piggy and Boar cubes for your savings

More PiggyBanks: <a href="https://www.thingiverse.com/c47_3d/collections/42428050/things"><img src="https://cdn.thingiverse.com/assets/ac/b1/8b/cf/d6/large_display_bbcc0076-cdd6-4df7-b96a-38fbece29895.jpg"></a>

Piggy Bank Vault (wich this model was based on): <a href="https://cults3d.com/en/creations/piggy-bank-safe-c47"><img src="https://fbi.cults3d.com/uploaders/14383210/illustration-file/5e3918ca-427a-4ec7-908c-7e8f2d950ca8/PiggySafe_16.jpg"></a>

100x100x109mm

No supports needed No glue needed for assembly Eyes and a smile will snap together with base model

Original models are with a lid (printed separately) but there is a version without it too (you will need to break a piggybank to get the money then)

If you don't have a good cooling on your printer you can print a base and a face separately - use PARTS files then Face should snap in to base model but those models were not print tested. In the worst case you will need to use a glue

Made for 0.4mm nozzle Unless your slicer has an automatic option to add inner supporting bridges (like in PrusaSlicer) you may need some infill - 10-15% should be fine then

Printed with 2 walls and 0.2mm layer height