This is a silhouette wall art of rolling hills with pine trees.

Rolling Pine Hills

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #4 (0.4mm) swap to Azure Blue
	At layer #9 (0.8mm) swap to White for the rest.


Winter Village

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyLite Lime Green Transmission Distance: 3.5

Swap Instructions:
	Start with Charcoal Black
	At layer #6 (0.7mm) swap to Natural
	At layer #8 (0.86mm) swap to Azure Blue
	At layer #13 (1.26mm) swap to Lime Green for the rest.


The Fighter

**Mrs. Claus:**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #5 (0.48mm) swap to Natural
	At layer #10 (0.88mm) swap to White for the rest.

**Hat:**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyTerra Lava Red Transmission Distance: 1

Swap Instructions:
	Start with Charcoal Black
	At layer #6 (0.56mm) swap to Natural
	At layer #7 (0.64mm) swap to Lava Red for the rest.


Mrs. Claus Baking

mrs claus_Front_165x165.stl

**Santa:**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #5 (0.48mm) swap to Natural
	At layer #10 (0.88mm) swap to White for the rest.

**Hat:**
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyTerra Lava Red Transmission Distance: 1

Swap Instructions:
	Start with Charcoal Black
	At layer #6 (0.56mm) swap to Natural
	At layer #7 (0.64mm) swap to Lava Red for the rest.


Santa's Protrait

Santa_Front_165x167.stl

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #5 (0.48mm) swap to Azure Blue
	At layer #13 (1.12mm) swap to White for the rest.


SnowFlake

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyLite Pro Metallic Red Transmission Distance: 0.5
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #6 (0.56mm) swap to Natural
	At layer #9 (0.8mm) swap to Azure Blue
	At layer #17 (1.44mm) swap to Metallic Red
	At layer #18 (1.52mm) swap to White for the rest.


North Pole Scene

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyTerra Lava Red Transmission Distance: 1
	PLA PolyLite Lemon Yellow Transmission Distance: 6.5
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #7 (0.64mm) swap to Azure Blue
	At layer #9 (0.8mm) swap to Lava Red
	At layer #12 (1.04mm) swap to Lemon Yellow
	At layer #17 (1.44mm) swap to White for the rest.


Skulls in the Sky

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyTerra Army Light Green Transmission Distance: 0.5
	PLA PolyLite Lime Green Transmission Distance: 3.5
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #6 (0.7mm) swap to Azure Blue
	At layer #11 (1.1mm) swap to Charcoal Black
	At layer #16 (1.5mm) swap to Army Light Green
	At layer #17 (1.58mm) swap to Lime Green
	At layer #18 (1.66mm) swap to Azure Blue
	At layer #19 (1.74mm) swap to Natural
	At layer #25 (2.22mm) swap to White for the rest.


Mrs. Frankenstein's Starry Night

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyTerra Army Light Green Transmission Distance: 0.5
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyLite Lime Green Transmission Distance: 3.5
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #6 (0.7mm) swap to Azure Blue
	At layer #11 (1.1mm) swap to Charcoal Black
	At layer #16 (1.5mm) swap to Army Light Green
	At layer #17 (1.58mm) swap to Azure Blue
	At layer #19 (1.74mm) swap to Natural
	At layer #25 (2.22mm) swap to Lime Green
	At layer #34 (2.94mm) swap to White for the rest.


Frankenstein's Starry Nights

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.3mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyLite Lemon Yellow Transmission Distance: 6.5
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #5 (0.46mm) swap to Natural
	At layer #22 (1.14mm) swap to Azure Blue
	At layer #26 (1.3mm) swap to Lemon Yellow
	At layer #33 (1.58mm) swap to White for the rest.


Witches Spire in the Moonlight

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Natural Transmission Distance: 21
	PLA PolyLite Pro Metallic Red Transmission Distance: 0.5
	PLA PolyLite Lime Green Transmission Distance: 3.5

Swap Instructions:
	Start with Charcoal Black
	At layer #4 (0.54mm) swap to Natural
	At layer #12 (1.18mm) swap to Metallic Red
	At layer #22 (1.98mm) swap to Lime Green for the rest.


Pumpkin Path

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyTerra Lava Red Transmission Distance: 1
	PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #4 (0.54mm) swap to Azure Blue
	At layer #6 (0.7mm) swap to Lava Red
	At layer #8 (0.86mm) swap to Savannah Yellow
	At layer #11 (1.1mm) swap to White for the rest.

The model is not as tall as your last slider.  Consider checking the Full Range button or change your Depth Mode.


Spooky Owl

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyTerra Lava Red Transmission Distance: 1
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #4 (0.54mm) swap to Lava Red
	At layer #8 (0.86mm) swap to Azure Blue
	At layer #12 (1.18mm) swap to White for the rest.


Kitty Witch

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyTerra Lava Red Transmission Distance: 1
	PLA PolyLite Lemon Yellow Transmission Distance: 6.5
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #4 (0.54mm) swap to Lava Red
	At layer #5 (0.62mm) swap to Lemon Yellow
	At layer #8 (0.86mm) swap to White for the rest.


Kitty In The Cauldron

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Filaments Used:
	PLA PolyTerra Charcoal Black Transmission Distance: 0.3
	PLA PolyLite Azure Blue Transmission Distance: 3
	PLA PolyTerra Lava Red Transmission Distance: 1
	PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
	PLA PolyLite White Transmission Distance: 5

Swap Instructions:
	Start with Charcoal Black
	At layer #4 (0.54mm) swap to Azure Blue
	At layer #6 (0.7mm) swap to Lava Red
	At layer #8 (0.86mm) swap to Savannah Yellow
	At layer #11 (1.1mm) swap to White for the rest.

Day of the Dead Sugar Skull

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Filaments Used:
	PETG JAYO Black Transmission Distance: 0.3
	PETG JAYO Gray Transmission Distance: 2.5
	PETG GEETECH Gray Transmission Distance: 3
	PETG JAYO White Transmission Distance: 6

Swap Instructions:
	Start with Black
	At layer #5 (0.62mm) swap to Gray
	At layer #8 (0.86mm) swap to Gray
	At layer #13 (1.26mm) swap to White for the rest.


Alpine Ski Lift

Discover 'Siren's Call' Inspired by the legends of oceanic lore, this model captures a siren perched atop a shipwreck, promising a piece that goes beyond entertainment and explores the realm of mythology. The instructions for printing are straightforward, and changes in color from black to gray, a fascinating Polymaker Teal, and finally to Cotton White translate into an awe-inspiring 3D creation that brings fantasy to life. 

The detailed precision and exceptional finish of our model is attributed to the recommended settings - 100% infill and a layer height of 0.08mm, featuring a base layer of 0.3mm. Setting up color exchanges at certain layers breathes life and adds an array of tones into the figure. These adjustments in color scheme occur sequentially from layer #21 (1.9mm) (in gray), layer #29 (2.54mm) (in Polymaker Teal), and finally at layer #32 (2.78mm) (in Cotton White), thereby allowing users to successfully emulate the intricate nuances of a siren's call. 


Sirens Call

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Swap Instructions:
	Start with Black
	At layer #21 (1.9mm) swap to Gray
	At layer #29 (2.54mm) swap to Polymaker Teal
	At layer #32 (2.78mm) swap to Cotton White for the rest.



'Buck on the Mountainside' This magnificent portrayal of a majestic buck against a mountainous backdrop.
The model is designed to be printed at 100% infill, with a layer height of 0.08mm and a base layer of 0.3mm. 

Swap Instructions:
	Start with Black
	At layer #15 (1.42mm) swap to Gray
	At layer #23 (2.06mm) swap to Army Light Green
	At layer #30 (2.62mm) swap to Army Dark Green
	At layer #32 (2.78mm) swap to White for the rest.

Buck on the Mountainside

Picture of a nice buck on the mountainside!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Swap Instructions:
	Start with Black
	At layer #15 (1.42mm) swap to Gray
	At layer #23 (2.06mm) swap to Army Light Green
	At layer #30 (2.62mm) swap to Army Dark Green
	At layer #32 (2.78mm) swap to White for the rest.



Immerse yourself in the world of 3D modeling with Thangs.com and explore this beautifully crafted Barn at Dusk model. This detailed rendition captures the tranquil ambiance of a friend's barn settling into the quiet of twilight.

This artistically designed 3D model should be printed with a 100% infill efficiency and a layer height of 0.08mm, laid over a base layer of 0.3mm. For accurate color representation and the best results, follow our specific color swap instructions: Begin with Black, switch to Army Dark Green at layer #21 (1.9mm), to Army Light Green at layer #29 (2.54mm), and to Cotton White at layer #32 (2.78mm) for the remaining layers. Explore more intricate details and complete your collection with this perfect addition under our Arts & Entertainment category on Thangs.com.

Barn at Dusk

HueForge picture of a friend's barn at dusk. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm

Swap Instructions:
	Start with Black
	At layer #21 (1.9mm) swap to Army Dark Green
	At layer #29 (2.54mm) swap to Army Light Green
	At layer #32 (2.78mm) swap to Cotton White for the rest.


Nema Motor Cable Chain Mount.stl

Couldn't find any mounts for the Enraged Rabbit Carrot Patches so I designed this mount to be used on RepRacks.

Print two of these for each ERCP. Mount has two spots for m3x5x4 Heat sets to be able to screw the spool buffers down to the mount.  

ERCP (Enraged Rabbit Carrot Patch) Spool Buffer Mount for RepRack

ERCP-RepRack-Mount.stl

Just a Network Admin that like to print and create. Hope you like what I have to offer and enjoy my offerings!

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

frankenbeegaming

Achievements

Voyager

Novice Maker

Seedling

Debutant