Santa: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Natural Transmission Distance: 21 PLA PolyLite White Transmission Distance: 5
Swap Instructions: Start with Charcoal Black At layer #5 (0.48mm) swap to Natural At layer #10 (0.88mm) swap to White for the rest.
Hat: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Natural Transmission Distance: 21 PLA PolyTerra Lava Red Transmission Distance: 1
Swap Instructions: Start with Charcoal Black At layer #6 (0.56mm) swap to Natural At layer #7 (0.64mm) swap to Lava Red for the rest.