19 Likes23 DownloadsOctober 10, 2023
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm
Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Natural Transmission Distance: 21 PLA PolyLite Pro Metallic Red Transmission Distance: 0.5 PLA PolyLite Lime Green Transmission Distance: 3.5
Swap Instructions: Start with Charcoal Black At layer #4 (0.54mm) swap to Natural At layer #12 (1.18mm) swap to Metallic Red At layer #22 (1.98mm) swap to Lime Green for the rest.
Category:
19 Likes23 DownloadsOctober 10, 2023
19 Likes23 DownloadsOctober 10, 2023