10 Likes10 DownloadsOctober 2, 2023
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.3mm
Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White Transmission Distance: 6
Swap Instructions: Start with Black At layer #5 (0.62mm) swap to Gray At layer #8 (0.86mm) swap to Gray At layer #13 (1.26mm) swap to White for the rest.
Category:
10 Likes10 DownloadsOctober 2, 2023
10 Likes10 DownloadsOctober 2, 2023