Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3 #b22f18 PLA BambuLab Tough Vermilion Red Transmission Distance: 3 #00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 #fce300 PLA BambuLab Basic Yellow Transmission Distance: 6 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Vermilion Red At layer #11 (0.96mm) swap to BambuLab Green At layer #20 (1.68mm) swap to Yellow for the rest.