Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 #ffffff PLA Kingroon White Transmission Distance: 5.8 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #13 (1.12mm) swap to Marine Blue At layer #20 (1.68mm) swap to White for the rest.