Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 1 #222ed2 PLA Copymaster 3D Royal Blue Transmission Distance: 2.7 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 This print uses 4 unique filaments

Swap Instructions: Start with Dark Blue At layer #8 (0.72mm) swap to Royal Blue At layer #14 (1.2mm) swap to Blue Gray At layer #20 (1.68mm) swap to Beige for the rest.