Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#080a0d PLA PolyLite Black Transmission Distance: 0.3 #ae2573 PLA Paramount 3D Harajuka Pink Transmission Distance: 5.5 #f36fa9 PLA PolyLite Temp Purple-Pink-Translucent (Med) Transmission Distance: 10 #e0a8bb PLA PolyTerra Sakura Pink Transmission Distance: 2.8 This print uses 4 unique filaments

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Harajuka Pink At layer #12 (1.04mm) swap to Temp Purple-Pink-Translucent (Med) At layer #18 (1.52mm) swap to Sakura Pink for the rest.