Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

#000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #4734aa PLA PolyLite Temp Purple-Pink-Translucent (Cold) Transmission Distance: 4 #0db2e2 PLA Polylite Cyan v2 Transmission Distance: 9 #dbde7b PLA PolyLite Temp Green-Lime (Hot) Transmission Distance: 8

This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Temp Purple-Pink-Translucent (Cold) At layer #13 (1.12mm) swap to Cyan v2 At layer #20 (1.68mm) swap to Temp Green-Lime (Hot) for the rest.