Tatemono Bathroom Wastebin With Storage - BAIC01

Assembled dimensions: 143 x 143 x 390 mm

A bold, sculptural solution to your basic toilet needs. A trash can plus storage for a spare roll of toilet paper. A simple friction-fit ring holds a plastic bag inside the trash can.

This is a set of components from the Infinite Containers 128 Series, where you will find additional sizes, shapes, and accessories. You can use this conveniently pre-assembled set, or build your own set from other components in the collection.

This set includes the following components: Container CS128-120 (143 x 143 x 124 mm) Container CS120-180 (143 x 143 x 184 mm) Lid: LR128-F-TS (139 x 139 x 14 mm) Finial: FP162-80-TS (30 x 30 x 90 mm) Retaining Ring: ATR128-15 (128 x 128 x 15 mm)

Objects in the photographs were printed on a standard desktop 3D printer, without secondary operations. The stripes in some pics were produced by switching materials during printing.

WARNING: This stuff can get addictive, please print responsibly. Always print as many as you need, but never more than you need.

Infinite Containers is a 3D printable modular system of stackable containers, lids, and related accessories. It includes thousands of components you can combine endlessly to create simple and elegant objects for home decor. From desk organizers to kitchen and bathroom accessories, lamps, flower vases, and planters, the possibilities are limited only by your imagination. Look for examples in our collections

• Dimensions: The first three digits of the item’s code represent the series number and the container’s inner diameter in mm. Components from the same series fit together, stack, and rotate on top of each other. The second set of digits indicates the height of the stacked container (excluding the 4mm nesting base).

• Scaling: Scale UP for customization. Scaling down may cause fitting issues.

Learn more about Infinite Containers.

Specifications and Recommended 3D Printing Settings

Required build volume: 178 x 178 x 204 mm

Scalable: YES Nozzle: 0.4 mm Layer Height: 0.2 mm Infill: 15% Rectilinear (replicates the translucent pattern shown in the pics) Tested with: PLA Supports: From platform only. The threads in the lid don’t require supports, and it would be very difficult to remove them. Use a raft for the threaded finial, then simply unscrew it from the raft after printing. The threaded finial locks into the lid, make sure you screw it in until you feel it lock.

Feel free to ask any questions in the comments or via email.

Printable Objects designs simple, elegant, and sustainable home decor for 3D Printing. Our thoughtfully crafted solutions are easy to customize and print, empowering you to easily create beautiful, practical objects affordably and with less waste. We make high-quality design more accessible than ever through the power of digital distribution and 3D printing. Find out more at printableobjects.com

Follow Printable Objects on Instagram for the latest ideas in 3D printed home decor: @printable_objects