Firefly Table Lamp - LIIC05 Modular table/bedside lamp

Dimensions:160 x 160 x 260 mm

Simple, elegant, easy to print and assemble, our Firefly lamp is an affordable, sustainable solution for your bedside or ambient lighting.

• Simple assembly of modular components from our Infinite Containers Collection. Do you need a larger, taller, or shorter one? Just assemble your own following this example. • The base serves as storage for extra cable. • The 40.8 mm hole fits most large lamp holders (E26, E27). Use the provided adapter for smaller lamp holders (E12, E14, E17) • Requires an electrical cord set with switch (IKEA Strala or similar). • We recommend using a 2W LED lightbulb, or a similar energy-efficient, low-heat lightbulb (7W Max).

This is a set of components from the Infinite Containers 96 Series, where you will find additional sizes, shapes, and accessories. You can use this conveniently pre-assembled set, or build your own set from other components in the collection.

This set includes the following components: Diffuser: Pierced Container CR96-120-P (120 x 120 x 124 mm) Shade: Lid LR96-CH (160 x 160 x 39 mm) Base: Slotted Container CR96-100-S (120 x 120 x 104 mm) Lighting apater ALA40-28P

Objects in the photographs were printed on a standard desktop 3D printer, without secondary operations.

In the images, filaments from our official materials partner 3DHoJor: Diffuser: Rapid PLA, Natural White Base/Shade: PLA Pro, Green, Matte PLA, Morandi Purple, Matte PLA, Milky White Adapter: Leftovers are perfect for these parts, which are not visible 😉

Infinite Containers is a 3D printable modular system of stackable containers, lids, and related accessories. It includes thousands of components you can combine endlessly to create simple and elegant objects for home decor. From desk organizers to kitchen and bathroom accessories, lamps, flower vases, and planters, the possibilities are limited only by your imagination. Look for examples in our collections.

Learn more about Infinite Containers on our website.

Specifications and Recommended 3D Printing Settings

Required build volume: 160 x 160 x 124 mm

Nozzle: 0.4 Layer: 0.2 Supports: YES Diffuser: 3 perimeters/wall loops, no infill. Use a Height-Range Modifier (0-6 mm) with a 15% Gyroid infill only for the bottom. Base/Shade Infill: 15% Gyroid Scalable: NO Tested with: PLA

Printable Objects designs simple, elegant, and sustainable home decor for 3D Printing. Our thoughtfully crafted solutions are easy to customize and print, empowering you to easily create beautiful, practical objects affordably and with less waste. We make high-quality design more accessible than ever through the power of digital distribution and 3D printing. Find out more at printableobjects.com

Follow Printable Objects on Instagram for the latest ideas in 3D printed home decor: @printable_objects