This model is restricted by licensing terms.
View license.
Makes hotend tubes 25mm to 55mm long.
Print with 0.4mm nozzle and typical settings.
BOM:
- 1 M3 square nut (thick or thin)
- 1 40mm M3 screw (socket head, fully threaded)
- Printed parts (typical printing settings)
- 4mm OD, 2mm or 1.9mm ID (Capricorn XS)
Tools:
- Cutter
- Power drill
- Small Philips (+) screw bit or screwdriver
Pre-supported, pre-oriented, built-in supports.
Check my other projects at mihaidesigns.com.
Categories:
190 Likes1.3K DownloadsDecember 12, 2021
190 Likes1.3K DownloadsDecember 12, 2021
This model is restricted by licensing terms.
View license.