Universal PTFE Tube Jig
1.6K downloads · 4 years ago · Makes hotend tubes 25mm to 55mm long.
Print with 0.4mm nozzle and typical settings.
[Step-by-step
This model is restricted by licensing terms.
View license.
Makes hotend tubes 25mm to 55mm long.
Print with 0.4mm nozzle and typical settings.
BOM:
- 1 M3 square nut (thick or thin)
- 1 40mm M3 screw (socket head, fully threaded)
- Printed parts (typical printing settings)
- 4mm OD, 2mm or 1.9mm ID (Capricorn XS)
Tools:
- Cutter
- Power drill
- Small Philips (+) screw bit or screwdriver
Pre-supported, pre-oriented, built-in supports.
Check my other projects at mihaidesigns.com.
Universal PTFE Tube Jig
1.6K downloads · 4 years ago in and
This model is restricted by licensing terms.
View license.
Cable desk grommet 60mm
Extruder test transition
Cable desk grommet 62mm
Ikea milk frother adapter
Celestron 80mm binoculars filter adapter
Legrand power strip mount
Heat gun holder
Purge calibration flat stacks for Bambu Lab and other single extruder multi-color 3D printers
Purge Calibration Z-stacks for Bambu Lab and other single extruder multi-color 3D printers
Tape Machine - filament rewind / respooling
10 kg Spool Holder
AMS stacking stand for Bambu Lab P1P and X1 #ThangsBambuContest
Love Bug Railway
Extruder E-steps calibration tool
Magnetic 4 Pin Pogo Connector
Universal Spool Holder, Fully 3D Printed
TZe Label Tape Canister
 - 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fattachments%2F049f7df7-ffac-4ab2-b89a-58f25dedc928%2F1.png&w=3840&q=75)
Ikea table caster wheel adapter
Guitalele Stand
Hi MihaiDesigns can you please upload the file without supports? (mainly at the base) as thats not strong enough for my printer, it ended up falling over
thanks.
I know I’m 3 years late, but for you and anyone else. I had the same issue so I tried a glue stick on my pei sheet and it stuck great!
Thanks for this design! It works great, I will post a make soon! Tomorrow if I remember! :)