Magnetic 4 Pin Pogo Connector
80 downloads · 5 years ago · Connector housings for the Mill Max 4-pin 4mm connectors. I used to run these for hotend wires in or
This model is restricted by licensing terms.
View license.
Connector housings for the Mill Max 4-pin 4mm connectors. I used to run these for hotend wires in order to swap hotends on my PitStop 1 extruder.
BOM (for each connector)
- 2x 8x5 cylinder magnets
- 2x 10-12mm M3 screw (countersunk screws are safer)
- 2x slim zip ties
- 1 Mill Max pogo connector (mare or female as needed). More details on the connectors here.
My wiring order was: heater, thermistor, thermistor, heater.
Check my other projects at mihaidesigns.com.
Magnetic 4 Pin Pogo Connector
80 downloads · 5 years ago in and
This model is restricted by licensing terms.
View license.
Cable desk grommet 60mm
Extruder test transition
Cable desk grommet 62mm
Ikea milk frother adapter
Celestron 80mm binoculars filter adapter
Legrand power strip mount
Heat gun holder
Purge calibration flat stacks for Bambu Lab and other single extruder multi-color 3D printers
Purge Calibration Z-stacks for Bambu Lab and other single extruder multi-color 3D printers
Tape Machine - filament rewind / respooling
10 kg Spool Holder
AMS stacking stand for Bambu Lab P1P and X1 #ThangsBambuContest
Love Bug Railway
Extruder E-steps calibration tool
Universal PTFE Tube Jig
Universal Spool Holder, Fully 3D Printed
TZe Label Tape Canister
 - 3d model](/_next/image?url=https%3A%2F%2Fstorage.googleapis.com%2Fproduction-thangs-public%2Fuploads%2Fattachments%2F049f7df7-ffac-4ab2-b89a-58f25dedc928%2F1.png&w=3840&q=75)
Ikea table caster wheel adapter
Guitalele Stand
