Test Tube Propagation Mount - Inverted
An inverted version of the test tube propagation mount.
3 different versions:
- Small (screw mounted)
- Full length (screw mounted)
- Full length (command strip mounted)
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the test tube, the screw holes are designed specifically for #8-10 x 1 in anchors and screws, and the command strip mount is the exact size of a regular large command strip.
Orientation The mounts should be upside down and the cleat should have the longer side facing down.
Print Settings .2mm layer height 15% grid infill 2 walls Monotonic top and bottom surface pattern
Filament & Hardware Filament I used for this print: Hatchbox Matte Ash Gray PLA Overture Matte Light Brown PLA Test tubes Hardware: #8-10 x 1 in anchors and screws Command Large Refill Adhesive Strips
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/
Test Tube Propagation Mount - Inverted
Heywood Wall Planter v2
Square Tapered Planter
Catchall for The Horizontal Rail
Sunglasses Holder for The Horizontal Rail
Shelf for the Horizontal Rail
The Rail - Coat Hook
The Horizontal Rail
Scales Planter with Hidden Drip Tray
The Rail Tripod V2
Tripod Lamp
The Rail - Tripod Attachment
The Rail - Ira Planter
The Rail - Storage Bins
Wall Planter with Hidden Drip Tray - LG03
The Rail - Hook Attachment
The Rail - Grow Light Attachment
The Rail v2
Hanging Planter - The Gio
Bottle Opener Coasters v2
What size test tube do you use with this?
I posted a link here for the ones I found to fit.
Would this work on the Rail v2 dovetail like the others?
Here is the link to the ones I found on Amazon that fit. https://www.amazon.com/gp/product/B011M30NIM/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
My test tubes just slide through the top section. The hole is perfect but I guess my tubes don't flare out enough.
My test tubes just slide through the top section. The hole is perfect but I guess my tubes don't flare out enough.
My test tubes just slide through the top section. The hole is perfect but I guess my tubes don't flare out enough.
is there a reason why I can't download the STL version?