The Poppy — but in stackable organizer form! Each piece twists together using the same twist lock as the drip trays on my planters. This would be great for travel, jewelry, small parts, etc.
There are three sizes for the bottom cup, three sizes for the middle cups, and a top cap. Each middle cup has connectors at the top and bottom, so you can make your organizer infinitely long if you want!
Supports None needed!
Scaling Can be scaled up or down however you like. The one in the first two photos was scaled down at 75%. I will say that the twist lock may not lock as well if you scale it up to a large size. If you have issues with that and want me to release specific sizes, let me know!
Orientation Each cup should have their bottoms on the build plate, how you'd expect them to be oriented. The top piece can be printed either way, but I prefer to print it upside down to get a nice texture on a PEI plate.
Print Settings .2mm layer height 15% grid infill 2 walls
Filament & Hardware Filament I used for this print: Overture Matte Light Brown PLA
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/