This is the exact same planter as the Grid, just without the texture so it prints much faster. I really like the simplicity of this one and have put up a bunch of these around my house. It's a pretty neutral design that could blend in to almost any aesthetic.
Supports The only version of this that I've been using supports on is Wall Simple Cup Pot 4.5. All other versions do not need supports.
For Wall Simple Cup Pot 4.5, I use supports under the sliding dovetail on the pot.
The slicer is going to want to add supports underneath the pot as well, which is unnecessary, so I added a support blocker to the whole pot and a support enforcer under the dovetail.
Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.
Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.
Print Settings .2mm layer height 15% grid infill. I've been using gyroid for the 4.5" command mount and it's much cleaner. 2 walls
Filament & Hardware Filament I used for this print: HATCHBOX Magic Stone PLA Hardware: #10-12 x 1-1/4 in screws
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/