This is one of my new favorites! The quilted pattern prints really well and looks great in any color. Both the 2.75" and 4.5" are available to print now. I've been improving my workflows so I hope to always release both sizes at the same time from now on.
This planter works with the same mounts as all my other wall planters. I've also included tabletop versions that don't have the wall mount.
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the command strips and the screw holes are designed specifically for #10-12 x 1-1/4 in anchors and screws.
Orientation The planter and tray should have their bottoms on the build plate. All mounts should have the sliding dovetail facing up.
Print Settings .2mm layer height 15% grid infill 2 walls
Filament & Hardware Filament I used for this print: Overture Matte Light Brown PLA Command Medium Picture Hanging Strips Hardware: #10-12 x 1-1/4 in screws
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/