Planter with Legs - The Lloyd
1.7K downloads · 3 years ago · Prints with no supports. I recommend using brims for the legs.
3 sizes included — 2.5", 4.5", and 6
This model is restricted by licensing terms.
View license.
Prints with no supports. I recommend using brims for the legs.
3 sizes included — 2.5", 4.5", and 6.5"
The legs need to be glued in to the base. I typically use Weld-On and a syringe to attached the legs but super glue works too!
kevin.s.campbell72 years ago
Very happy with how it turned out. Printed on AnkerMake M5C with ERYONE Matte Navy Blue PLA filament. Scaled the 6.5" up to 110% to fit the plant I had in mind. Great design!
william.heimbigner2 years ago
Printed using 2 different 30% wood-filled PLA filaments (had a little bit of nozzle clogging but it went okay), and then coated with XTC3D epoxy/resin to waterproof and shield the wood.
PrinterCreality K1 Max
MaterialPLA
Layer height0.2 mm
Planter with Legs - The Lloyd
1.7K downloads · 3 years ago in and
This model is restricted by licensing terms.
View license.
Half Dome Wall Planter
Square Bubbles Planter
Plastic Bag Dispenser
Heywood Wall Planter v2
Square Tapered Planter
Catchall for The Horizontal Rail
Sunglasses Holder for The Horizontal Rail
Shelf for the Horizontal Rail
The Rail - Coat Hook
The Horizontal Rail
Scales Planter with Hidden Drip Tray
The Rail Tripod V2
Tripod Lamp
The Rail - Tripod Attachment
The Rail - Ira Planter
The Rail - Storage Bins
Wall Planter with Hidden Drip Tray - LG03
The Rail - Hook Attachment
The Rail - Grow Light Attachment
