Planter with Legs - The Ellwood
Prints with no supports. I recommend using brims for the legs.
3 sizes included — 2.5", 4.5", and 6.5"
The legs need to be glued in to the base. I typically use Weld-On and a syringe to attached the legs but super glue works too!
Supports None needed!
Scaling Can be scaled although the clearances for the legs may be too loose or too tight if you scale too far in either direction.
Orientation The planter should have its bottom on the build plate. The legs should be upright with with tenon (peg) facing up. Use a brim for the legs.
Print Settings .2mm layer height 15% grid infill 2 walls
Filament & Hardware Filament: Bambu Lab Matte Latte Brown PLA & Bambu Lab Marble PLA
Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods
Planter with Legs - The Ellwood
Half Dome Wall Planter
Square Bubbles Planter
Plastic Bag Dispenser
Heywood Wall Planter v2
Square Tapered Planter
Catchall for The Horizontal Rail
Sunglasses Holder for The Horizontal Rail
Shelf for the Horizontal Rail
The Rail - Coat Hook
The Horizontal Rail
Scales Planter with Hidden Drip Tray
The Rail Tripod V2
Tripod Lamp
The Rail - Tripod Attachment
The Rail - Ira Planter
The Rail - Storage Bins
Wall Planter with Hidden Drip Tray - LG03
The Rail - Hook Attachment
The Rail - Grow Light Attachment
I'd also love to see this design updated with a drip tray.
MEEP.
Could we get a drip tray for this?
Sure!
Two years later. STILL NO DRIP TRAY!
Wrong listing but ur products on there
https://cultivat3demporium.com/product/ice-cream-cone-planter-pot-eco-friendly-3d-printed/
Person using ur pics