Monstera Leaf Magnet
The Monstera leaf is so iconic, who wouldn't want one on their fridge? This is a simple print that would be great for plant people.
This can be a one or two color print. The top layer is .2mm thick, so if using Bambu Studio/OrcaSlicer, all you have to do is paint the veins with a one click fill of the top layer.
I've included two sizes — small (4" - pictured) and large (5")
Supports None needed!
Scaling I wouldn't recommend scaling this one since it perfectly fits the 10x2.3mm magnets.
Orientation Print with the vein side up, magnet side down.
Print Settings *I've included the 3MF if you want to use my settings.
- .2mm layer height
- 15% grid infill
- 2 walls
Filament & Hardware Filament I used for this print: Hatchbox Forest Green PLA & Overture Matte White PLA Magnets: 10x2.3mm Small Round Fridge Magnets
Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/
Monstera Leaf Magnet
Heywood Wall Planter v2
Square Tapered Planter
Catchall for The Horizontal Rail
Sunglasses Holder for The Horizontal Rail
Shelf for the Horizontal Rail
The Rail - Coat Hook
The Horizontal Rail
Scales Planter with Hidden Drip Tray
The Rail Tripod V2
Tripod Lamp
The Rail - Tripod Attachment
The Rail - Ira Planter
The Rail - Storage Bins
Wall Planter with Hidden Drip Tray - LG03
The Rail - Hook Attachment
The Rail - Grow Light Attachment
The Rail v2
Hanging Planter - The Gio
Bottle Opener Coasters v2
Could you make the veins on the same height of the leave? So we can print it face down. That way the finish is much cleaner.
Bambulab - PLA Matte - Dark Green esun - ePLA Matte - Milky White 10x2mm magnets
how do you get 2 colors on this? my printer only supports 1 color printing at a time
Do a pause at layer height then change out the filament to the white.