Gridfinity iFixIt 26 Bit Screwdriver Holder

Gridfinity module for holding the driver and extension from the old iFixIt 26 bit screwdriver kit.

It does not hold the 4mm bits.

DeWalt Blower Mount.stl

Drain Strainer 40mm

Drain strainer for 40 mm drains

**Printing**
Support from buildplate

Belt tool holder

Gridfinity Harbor Freight Pittsburgh SAE and Metric 32 pc Combination Wrench Set Holder

Pittsburgh Standard 10pc Gridfinity Holder v5.stl

GridFinity hexagonal bit module (4mm & 1/4")

bitstorage_1x1x6.35.stl

Nuclear Humidifier Cooling Tower

Replacement for directional humidifier vent. [Remixed from this model.](https://open3dmodel.com/3d-models/nuclear-cooling-tower_491497.html) 


V2 Overlook Hotel Carpet Tile Edge

tile_overlook3d_edge_brn.stl

A Dozen Love Locks

Display only do not print.stl

Gridfinity 3 Tool Debur holder

I only put 9 holes on the thing, even though you get 10 blades. I assumed the one in the deburring tool was counted. This one is based off the model here.

I got the set [here](https://www.amazon.ca/dp/B08SLBT6SJ?psc=1&linkCode=ll1&tag=genghisjohn-20&linkId=dbf8bd1cd29017b2ed9a4eba16ddad4c&language=en_CA&ref_=as_li_ss_tl)

gridfinity_deburring_tool_spare blades_V2.stl

Makita 18V Lantern DML807 Upgrade

This is an upgrade for the Makita 18V LTX Lantern, 20 LED bulb variant. This may work on the other variants, but I don't have them to test. If you aren't certain which variant you have, the correct version is green & has a USB port. 

I use this light at night when working with my telescope and/or walking the dog. It's way too bright in it's default configuration, but otherwise perfect. 

**Known Issues**: You'll have to finesse the prints if you want to keep the reflector dish for the top light. I found removing it dims the light perfectly, so I kept it off. 

The two halves don't fit together perfectly, mostly due to layer squishing. If I had to do it over again, I might use a raft. This will reduce the light's water resistance. 

DML807

**Print Settings//Notes**:
- I printed the glow part using Inland PLA+ Luminous Green and the red part using PolyLite translucent red PETG.
- Print the model horizontally, so the top handle isn't reliant on layer adhesion strength.
- I used supports, but I don't know if they are necessary. 
- .28 layer height
- gyroid infil (raise/lower fill density based on dimming preferences)
- 2 shells (vert/horiz)

Ryobi Multi-Tool (TDW025786) allen wrench holder

If you ask me, every tool that requires a tool to adjust it should have a place on the tool to hold the tool. Some Ryobi tools have this feature, but the Multi-tool (brushed -- the brushless may be different) does not.

Three 6mm x 2mm magnets are needed to hold the allen wrench into this holder. Very likely it will just fall out without them.

You can see from the photo how it is hot-melt-glued to the base of the tool, just above the battery. It's never proven to be in the way, so I'm happy with it.

Home Improvement

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Gridfinity iFixIt 26 Bit Screwdriver Holder

DeWalt Blower Mount.stl

Drain Strainer 40mm

Belt tool holder

Gridfinity Harbor Freight Pittsburgh SAE and Metric 32 pc Combination Wrench Set Holder

GridFinity hexagonal bit module (4mm & 1/4")

Nuclear Humidifier Cooling Tower

View 11 new models

A Dozen Love Locks

Gridfinity 3 Tool Debur holder

Makita 18V Lantern DML807 Upgrade

Ryobi Multi-Tool (TDW025786) allen wrench holder

V2 Overlook Hotel Carpet Tile

Gridfinity Drill Holders (parametric)

View 25 new models

xemeneia.fbx

Small Plier - tool rack V1

ryobi-plunge-vacuum.stl

View 70 new models

Directional Nozzle for humidifier