tracking pixel
S

Replacement plier grips (TPU recommended)

by
Sagittario
Follow
Follow
Remix Model
S
Sagittario
|
Image 1 of 2
Replacement plier grips (TPU recommended) 3d model
S
Sagittario
|
Image 1 of 2
Replacement plier grips (TPU recommended) 3d model
2D
3D
Makes
Replacement plier grips (TPU recommended) 3d model
Replacement plier grips (TPU recommended) 3d model
This model is restricted by licensing terms. 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3788668.

I needed some replacement grips for a pair of pliers that I found, turning to rust in my garden. I cleaned them up in white vinegar, but the handles were split and beyond repair.

I made these and printed them in TPU, I don't recommend PLA as they may not fit and will not be as strong.

I've been playing with TPU filament recently and it seems almost indestructable.

I printed at 200 degeess hot end, 50 degrees heat bed. 0.2mm layer height. Although the heat bed is probably not needed.

There are 4 versions of the grips, they only differ in width and straight or with spur, if you like a nice wide comfy grip, just print the wider ones.


4 Likes3 DownloadsDecember 15, 2022


4 Likes3 DownloadsDecember 15, 2022
This model is restricted by licensing terms.