Cake Lamp - Kitsch, Vintage, Compatible with IKEA Strala Lamp

pixelandpapier__cake_lamp_bottom_cream.stl

WALDO Planter 02 (80mm)

WALDO 2_Prusa_SplitColor.3mf

Hamtaro & Bijou - Valentine (Fanart)

Bijou.stl

Sunrise Vase for Home Decor

Sunrise.stl

Origami Inspired Tree Ornament #4

Origami Inspired Tree Ornament #4.stl

Piranha Plant Inspired by Super Mario - Pre-Supported

Piranha Plant.stl

Bulbasaur Lego

TriDimen Studio - Baubasaur Lego.3mf

Spiritual, Know Your Power 1

Spiritual_1.stl

Group of Pumpkins

GroupOfPumpkins_SinglePiece_FlatBottom.stl

Labubu Wall Art

Labubu Art.3mf

Christmas Teardrop Ornament 5

Use this version if you want to create your own supports. I recommend printing the version with built-in supports first.

Teardrop 2021 v9.1.stl

Zombie Pumpkin Dragon 

Zombie pumpkin dragon no wings.stl

Vulcanic dragon egg + night light

Dragon egg Part 1.stl

Yeah, Another christmas Ball

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**ABOUT THE DESIGN**
Yep, this is yet another variation on my Christmas Balls with Integrated Stems. You can't keep a good designer down. There's no photo because my prototype is still printing. Still, it's 80% done and the rest is identical to other prints I;'ve published, so I already know it should work. Give it a try. It's relatively easy to print. 

**RESIZING**
This ornament should scale up well, but I'm not sure how much smaller you could print it using a consumer FDM printer. Using a resin printer, you could probably print it much smaller.

**PRINT TIME**
About 6 hours

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 – 0.8 mm.

I had the best results using Cura setting the default width to 0.4 mm and adding custom settings for the main ball that printed it 0.8 mm thick. You can do this by adding a support blocker to the bottom and giving it custom settings of 0.4 mm. Cura adds the two and prints the area within the blocker at 0.8 mm.

*Infill*
These do not need any infill. JUST DON'T DO IT.

*Speed*
* Outer Wall: 35 mm/sec
* Inner Wall: 40 mm/sec
* Travel SpeeD: 60 mm/sec

*Build Plate Adhesion*
I used a brim. With the supports, you shouldn't need a raft.

*Supports*
You will probably need supports for both bed adhesion and the overhang on the first few layers. You shouldn't need supports for the loop at the top. Adding them would just increase the chances the supports broke and caused the print to fail. If you get supports inside the ball, just add a support blocker.

* Support Structure: Normal
* Support Placement: Touching Buildplate
* Support Overhang Angle: 60 Degrees

DECORATION

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Cake Lamp - Kitsch, Vintage, Compatible with IKEA Strala Lamp

WALDO Planter 02 (80mm)

Hamtaro & Bijou - Valentine (Fanart)

Sunrise Vase for Home Decor

Origami Inspired Tree Ornament #4

Piranha Plant Inspired by Super Mario - Pre-Supported

Bulbasaur Lego

Spiritual, Know Your Power 1

Group of Pumpkins

Labubu Wall Art

Christmas Teardrop Ornament 5

Zombie Pumpkin Dragon

Vulcanic dragon egg + night light

Yeah, Another christmas Ball

SW Darth Vader, Wall Art

Zombie Hand (Pre-Supported)

GEN2 Decor - Faceplates - Chevron

Tiles from Portugal (Wall, Desk or Stackable Lamp)

SW R2D2, Wall Art

Sunflower