| Visit JERRARI.com for Instructions and a complete look at the GEN2 collection
The Chevron Series is a collection of drawer faceplates for the GEN2 Decor Series. Simply print the drawer bodies from one of the Base Drawer Models, and slide your personalized faceplate in place. Lock in place by mounting a printable handle with a M3 screw and nut.
The Chevron series features an elegant appearance that is easy to print and also a blast to customize. You can print as a single solid color, but take a shot at printing this in two colors using a single color change and you will be delightfully impressed.
I honestly found this to be a great way to experiment with filaments. I was shocked how well these faceplates turned out using wood-filled filament. Another example is printing with textured steel sheets such as carbon fiber, for a very exotic look.
What You'll Need
BASE DRAWER MODELS • GEN2 Decor Drawers - Standard - DOWNLOAD
HANDLE/KNOBS • BlockBar Series - DOWNLOAD • Crystal Series - DOWNLOAD
HARDWARE Includes affiliated links to help support my projects • Filament - Poplar Wood Filament (this is what I used in many of my photos) ps. use hardened nozzle for abrasive filaments. • M3 nuts and screws: M3x6 - M3x10- I prefer this kit
INSTRUCTIONS • Push M3 nuts into slots on handles/knobs
• After sliding the faceplate into position on the GEN2 Decor Drawer use a M3 screw starting it from inside the front of the drawer, passing it through the faceplate and thread it into the M3 nut on the handle, securing it in place.