Wooden skull mushroom planter

Wooden skull.stl

Knight Duck

knight_duck.stl

Kaleidoscope Christmas Ball 1

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5100757.

I designed this using Affiinity Designer to create cross-sections and then did everything else in Blender. 

I designed theis to print easily, to be light, and to look elegant when printed in one color. I recommend using a metallic or silky filament (or spray paint the final print with a metallic paint). The metallic or silky highlights will catch the light and show off the complex geometry of the ornaments.

At 100%, this is 80mm wide, which is a nice size for trees 1.5 meter and larger. However, I scaled a similar design to 60% and it looks great. At that size, it will work well on trees as small as 0.5 meter high. You may be able to scale this down slightly smaller than 60%, but I haven't tried it. If you do and it works, please post a comment.

PRINT SETTINGS

To make the print as light as possible, I printed at just 0.4mm walls and 0.45mm top/bottom thickness. I also used Cura's Support Blocker and Per Model Setting's "Modify Settings for Overlaps" to add 20% infill - but just for the bottom 6mm of the ornament. I recommend a layer height of 0.15mm.

You won't need a raft, but I recommend using a brim.

There are other parts of the ornaments that appear to need infill, but they are self-healing and do not show in the final print if you leave out the infill. Infill is really only needed to the bottom of the inside of the ornament. Adding infill everywhere will really increase the weight, which means it may not work on all Christmas trees.

For supports, I used:

- Support Placement: Everywhere
- Support Overhang Angle: 60 degrees
- Support Pattern: Concentric
- Support Density: 15%
- Enable Support Brim: Yes
- Support Brim: 3mm
- Support Roof Density: 75%
- Support Floor Density: 50%

If you print with 0.4mm walls and you wind up with holes in your print, I recommend increasing the flow rate slightly and maybe reduce travel and print speeds.


Beskar Short Sword | No AMS, No Support, No Glue

Silk Silver.stl

PLEIADES Soap Cover // 57x83x103

PLEAIDES Soap Cover 57x83x103.stl

Baby vampire dragon 2025 copy.stl.stl

Baby vampire dragon 2025 copy.stl

Fluent Form – A Vase of Flowing Elegance

Fluent Form.stl

MrsHerb- Nomz

MrsHerb Parts 3mf - Nomz.3mf

Minimalist Designer Bowl

Bowl-7.stl

Skull Heart : Pen holder, Keychain, Decoration

skull heart decoration.stl

Diffuser Type 4 - Lamp accessories by Lunfardo

Diffuser Type 4.3mf

Rose spider

Rose spider.stl

Canadian Plague Doctor Goose

Plague Doctor Goose_Standing.stl

Stacked Diamond Christmas Ball

Quad Stacked Diamonds Trio Large Patched v3.stl

Double Spiral Christmas Bulb 2024

double spiral bulb v3.stl

Pac Man wall art

Pac Man_1.stl

Lovey the Cactus

LoveyCactusPaintedSupports.3mf

Decorative Easter Egg Collection

EasterEgg2_Bottom.stl

Lantern Christmas Bulb 2024

Lantern Bulb.stl

TWO Different Minecraft Movie Chicken Jockey Wall Art

minecraft chicken jockey.stl

DECORATION

Most Popular of All Time

Categories

Popular

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Wooden skull mushroom planter

Knight Duck

Kaleidoscope Christmas Ball 1

Beskar Short Sword | No AMS, No Support, No Glue

PLEIADES Soap Cover // 57x83x103

Baby vampire dragon 2025 copy.stl.stl

Fluent Form – A Vase of Flowing Elegance

MrsHerb- Nomz

Minimalist Designer Bowl

Skull Heart : Pen holder, Keychain, Decoration

Diffuser Type 4 - Lamp accessories by Lunfardo

Rose spider

Canadian Plague Doctor Goose

Stacked Diamond Christmas Ball

Double Spiral Christmas Bulb 2024

Pac Man wall art

Lovey the Cactus

Decorative Easter Egg Collection

Lantern Christmas Bulb 2024

TWO Different Minecraft Movie Chicken Jockey Wall Art