Closed Spiral Christmas Ornament

**ABOUT THE DESIGN**
This is a new variation on my Christmas Balls with Integrated Stems.

**NOT TO BE SOLD**
**I'm sharing my files so that you can make them for yourselves or give them away as gifts. I hope you enjoy them. I do not authorize sale of my work by anyone. Please don't ask me.**

**RESIZING**
These should scale up well, but I'm not sure how much smaller you could print them using a consumer FDM printer. Using a resin printer, you could probably print them much smaller.

**PRINT TIME**
About 4 hours.

**PRINT SETTINGS**
The trickiest parts to print is the top of the stems. Using FDM, if you don't temp, speed, flow, and cooling right, the thin parts of the stem will melt as you print. Thinner walls help. If that's not enough, try increasing the layer height. I printed at 200 C with 115% flow.

*Thickness*

* Layer thickness: .15 mm
* Wall thickness: 0.4 mm. 

*Infill*
This does not need any infill. JUST DON'T DO IT – especialy if you print it with transparent filament.

*Speed*
* Outer Wall: 20 mm/sec
* Top/Bottom Speed: 20 mm/sec
* Travel Speed: 50 mm/sec

*Build Plate Adhesion*
I relied on the supports for build plate adhesion. 

*Supports*
I first printed with used normal supports and an overhang angle of 67 degrees and no other supports. It worked until 2 minutes from completion, when the model came loose from the bed. When I tried again, I with an overhang angle of 64 degrees and added 8 custom supports that keep the model from wobbling. I've included a screenshot from Cura of the supports. 

I added a support blocker in the loop to keep from having supports added inside the loop.

Retro Chic Christmas Ornaments

Retro Chic Spiral Ornament Whole v2.stl

Spiral Christmas Finial 2024

Finial Spiral Whole.stl

Cathedral Christmas Tree Topper 2024

Topper Cathedral Whole.stl

Knitted Penguin Figurine and Ornament / No Supports / 3MF Included

Knitted Penguin Ornament + Figurine 4 Colors FF Bambu Studio.3mf

R2D2 Christmas Tree Decoration

R2D2 Christmas Ornament Frikarte3D.stl

Noelle Vase for Cute and Simple Christmas Decor

Noelle.stl

Festive Santa Penguin Figurine for Christmas Decor

Penguin with gift_.3mf

Not so… XL Nutcracker, for smaller build plates

Not so.. XL Nutcracker.3mf

Pikachu in a Christmas Sock_Pose 1 (Fanart)

Pikachu in a Christmas Sock_Pose 1_Normal Sock.stl

Ice Bowl (Small)

Add some artic chic to your serving table this year with these cool ice bowls.

See here for video: https://youtu.be/wdaEN05fzJQ 

Small Ice Bowl:
Large Ice Bowl:

These are advanced prints that require a well calibrated printer and experience with slicing complex models. 

The bowls are printed upside down. I recommend raising the model 3mm off the build plate and building supports up into the cavity of the bowl.

In order to maximize optical clarity and visual effect, you will want to minimize the amount of infill. These are excellent prints to try out the “lightening infill” feature in Cura. “Lightening infill” minimizes the amount of infill material used, and also creates interesting “crack” silhouettes in the finished print.

Increase the infill density and reduce the angle of overhang that gets supported, aiming for adequate support at the base of the icicle, but minimal support up inside the icicles. Be sure to do a layer-by-layer inspection prior to printing to ensure that all areas are properly supported.


Letter Board Bauble

Display only do not print.stl

SNOWMAN CHRISTMAS Z-MINI FOR FREE

Snowman Z-Mini.stl

Christmas Pyramid

Latte Brown.3mf

Merry Christmas Tabletop Decoration

MerryChristmasSign_V3.stl

TPMS Tree (Fischer Koch S)

TPMS Tree (Fischer Koch S).stl

Finial Noise Ornament 3

Finial Noise Ornament 3.stl

Snowdragon 2025

Snowdragon 25.stl

Darth Vader Christmas Tree Decoration

This is a Darth Vader Mask Christmas Tree Decoration.
It's designed to be printed in different color changes to achieve the final result, if you want you can print it in one color and paint later.
This is the filament color change configuration if you print with 0.2mm layer:
0 to layer 13 (0 to 2.6mm) = White
14 to 17 (2.8 to 3.4mm) = Black
18 to 21 (3.6 to 4.2mm) = Red

ALL Frikarte3D designs are protected by the Copyright Law. By downloading, YOU HAVE NO RIGHT to sell any digital files or print models of my designs without my explicit written consent.

To sell them legally, message me so we can work out a deal.

Hope you like it! Any advice, or recommendation is welcome! Happy Printing!

I would be very grateful if you print it and put it on social networks to tag me at [Frikarte3D](https://www.instagram.com/frikarte3d/)

Santas House Diorama - Christmas Home Decoration

White_Hills_Part2.3mf

Christmas decoration

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Closed Spiral Christmas Ornament

Retro Chic Christmas Ornaments

Spiral Christmas Finial 2024

Cathedral Christmas Tree Topper 2024

Knitted Penguin Figurine and Ornament / No Supports / 3MF Included

R2D2 Christmas Tree Decoration

Noelle Vase for Cute and Simple Christmas Decor

Festive Santa Penguin Figurine for Christmas Decor

Not so… XL Nutcracker, for smaller build plates

Pikachu in a Christmas Sock_Pose 1 (Fanart)

Ice Bowl (Small)

Letter Board Bauble

SNOWMAN CHRISTMAS Z-MINI FOR FREE

Christmas Pyramid

Merry Christmas Tabletop Decoration

TPMS Tree (Fischer Koch S)

Finial Noise Ornament 3

Snowdragon 2025

Darth Vader Christmas Tree Decoration

Santas House Diorama - Christmas Home Decoration