The Not so XL snowman, for smaller build plates like the A1/P1S If you looking for the Larger version, please go to the XL snowman suitable for Larger build plates, like H2D and H2S So not as complex as the XL santa. but still a fun print and build. The model does require glue although stays together fairly well without with the XL snowman i have trialed using cavities, so the two main body parts have a hollow section just to save a little filament. the parts are pretty straight forward and named as to what they are. there are two sets of connectors. a 0.15mm and a 0.2mm I suggest 0.2mm for this size and should be fine on most printers. if you are finding them loose then use the 0.15 connectors. i also suggest the connectors are printed upright for better acuracy. just one point to note, the eyes in my model ar different to the file. the file now includes eyes that print separately but i hadn't done this in the version i printed. 0.2 layer. infill varies, on the larger pieces, 6-10% is fine, the smaller pieces 10-15%. it does require some supports, so i would recommend just turning on tree auto and let it do its things. just set top z to 0.275 for supports to just come away easily. filaments used. Bambu white, black, oranges and matte, brown, blue and red.

0.2 is represented by 02 on file name and 0.15 is represented by 015 on file name.