Opel Logo 🚗

This is one of my first 3D designs on SketchUp on 2014 when I bought my first car, an Opel Vectra B from 1998.
Just acquired a 3D Printer and adapted the model to be printable.
This is just the Opel brand logo that you can use on your designs or to have as a decoration.

Printing Video: https://youtu.be/nNZUnSJp22U
Render Video: https://youtu.be/l7ZVHcItfIY
Cults3D: https://cults3d.com/en/3d-model/gadget/opel-logo-magnustor3d
3D Warehouse: https://3dwarehouse.sketchup.com/model/5efffea0d7c085c6b3d68386982a651e/Opel-Logo

Want to know what's behind this model? [Read this post!](https://frikarte3d.blogspot.com/2015/03/opel-logo_24.html) 

Opel Logo

Smartphone Holder for Suzuki Vitara

Handyhalter-Vitara-Luftungsring.stl

TireBooster Mount to JoeBlow Track Pump

TireBooster_JoeBlow_TOP.3mf

Steering wheel center cap

Center cap for a steering wheel. I have used this as a template to make center caps with various logos, text, etc. 

Bolt pattern is 6 x 70mm. Holes are 5mm diameter.

mitsubishi_logo_kc.stl

Mitsubishi logo key chain. Easy and fast print.

Infiniti key ring

Little Jeep Car - PIP (Print In Place) without support

Little Jeep Car for Print in Place !!!

It have a 0.5mm clearance for work with almost every 3d printer!

It is Scalable!
If you want to scale down, watch for your own 3d printer clearance (mine is 0.3mm, so 40% down it would be able to spin freely)
If you want to scale up, the clearance will be higher too.
So if the original model the parts are getting glued together, scale a little up for it to work.

If you downloaded and enjoyed, leave a like!

Consider following us in social media!
https://www.instagram.com/uniduni3d/
https://www.youtube.com/channel/UCi9cvu7e2rjajhg9ldt6-tg


Volkswagen Key Ring

Battlefield Vehicle 

ape work in progress 

XT350 Chain Guard

This model is untested but the dimensions should be close enough for this purpose. If it does not fit please leave a comment and I will make changes accordingly.

This should be a direct replacement for the XT350 Chain Guard, part number 30X-22153-00-00

Thule WingBar Profile

A replacement for the Thule Wing Bar rubber profile which might come loose and lost when driving at higher speeds.

The model is just updated to slide in easier, the standard length is just about 10cm so you need some to fully cover your bars.

Prints nicely in TPU95A standing upright with no supports, I recommend you use LostInTech's fine TPU cura profile (https://www.lostintech.co.uk/profiles/) to slice this particular model

ferrari hub 5mm.stl

boat speed.STL

Fahrradhalter

2xGrundhalter - Version 2

Kayak Paddle Clip.stl

Kayak paddle clip from Perception Eclipse 17

2013 F150 Phone Holder

truck dash mount sleeve.stl

tire.obj

Electric_Motorcycle.STEP

Assem3.STEP

AirVentBracket for Toyota RAV4 (2019+)

If you own a Toyota RAV4 (5th model, 2019 onwards) and feel the need to mount anything to your dashboard, look no further:
Here's a simple no-tools-needed mounting clamp that slides nicely around the dash cushions just under the side air vents and is strong enough for your everyday phone, garage door remote, picture frame - whatever.
 
The clamp installs on the car, the mounting plate clicks on to the clamp - bingo!
If you feel it is too thin, scale it - sideways only, since otherwise it won't fit any more. You knew this, didn't you?

But ... wait ... just how do I ... ??? 
Easy: Since you're here you're into making things - good! Just design a custom case for whatever you want to mount,  marry this case with the mount plate (in any 3D software that handles .stl or .step files) and you're done.

Mounting: 
Mount from below, i.e. hook the 90° side of the clamp between cushion and dash body, then push on the upper part until it snaps between cushion and vent frame and you're done.

Printing: use PETG since in cars you might expect higher temperatures than what PLA could handle. Print the clamp lying on the side to ensure strength due to the layers nicely go along the clamp to carry the load and not to worry about layers becoming detached - they won't. As for "your" case / hook / whatnot - print in a direction that covers for the forces the case has to take up.

AirVentBracket-1.5mm.stl

RD1 CRV Cupholder v1

Simple, yet functional rd1 cupholder. This model is still in test form, print and comment with issues or improvement. 

NOT FOR RESALE.

 

Autos & Vehicles

Newest

Categories

New Uploads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Opel Logo 🚗

Smartphone Holder for Suzuki Vitara

TireBooster Mount to JoeBlow Track Pump

Steering wheel center cap

mitsubishi_logo_kc.stl

View 14 new models

Little Jeep Car - PIP (Print In Place) without support

View 16 new models

Battlefield Vehicle

XT350 Chain Guard

Thule WingBar Profile

ferrari hub 5mm.stl

View 11 new models

Fahrradhalter

Kayak Paddle Clip.stl

2013 F150 Phone Holder

tire.obj

Electric_Motorcycle.STEP

AirVentBracket for Toyota RAV4 (2019+)

RD1 CRV Cupholder v1