Rack Driven 7 Segment Display

Build 2 - Cams and Housing - 125g.stl

Multiboard Spray Bottle Holder

spray bottle holder.stl

Knitted Pumpkin

Knit Pumpkin Body.stl

Teardrop Pod Plain

This Teardrop Pod can be used to hang plants, moss, or any other small object. 
This version is designed for FDM printing. There are three similar versions that feature delicate lattice structures and are designed for resin printing.

See here for video of Plain Teardrop Pod: https://youtu.be/2bUXOdHXvWI 

Links for resin models:

Video of resin models: https://youtu.be/ZT0Dhcexz80 

Download links for resin models:
Teardrop Pod FCC Lattice: https://than.gs/m/889694 
Teardrop Pod Reentrant Lattice: https://than.gs/m/889700 
Teardrop Pod Truncated Cube Lattice: https://than.gs/m/889711 


Chain Link Gridfinity Bin 100mm

This single unit “chain link” bin is compatible with the Gridfinity modular storage system designed by Zack Freedman: https://thangs.com/?category=Gridfinity#content . It is part of a set of four sizes with inside heights of approximately 40mm, 60mm, 80mm and 100mm

See here for video: https://youtu.be/CK3MwY4R9zw 

The boxes will fit on to the baseplates found here: https://social.thangs.com/m/60925 . 

Prints without supports. Holes to insert 6mmx3mm (1/4” x 1/8”) cylindrical neodymium magnets on the bottom to use with magnetized Gridfinity baseplates.

Download all sizes here:
Chain Link Gridfinity Bin 40mm: https://social.thangs.com/m/664238 
Chain Link Gridfinity Bin 60mm: https://social.thangs.com/m/664257 
Chain Link Gridfinity Bin 80mm: https://social.thangs.com/m/664280 
Chain Link Gridfinity Bin 100mm:


Christmas Tree

This is an easy-to-print, modern Christmas tree. Looks really well as a winter decoration. It can be printed in vase mode as well as standard mode.

---

**Recommended print settings**

- vase mode: yes
- bottom solid layers: 7
- extrusion width: 1 mm

Printing it with 1 mm extrusion width makes it solid enough.

This model prints nicely with fuzzy skin feature on it. It adds additional strength and hardiness to the walls.

When printing in standard mode, seam position should be set to aligned.

The tip of the tree should be printed slowly to avoid unwanted deformations.

Xmas Tree

Gridfinity TS100 soldering iron holder

Holds the TS100 and three tips vertically.

Judge Dredd (fan art)

Obi-Chunk Kenobi - Star Wars Obi-Wan Kenobi Kit | No Supports, No AMS, No Glue

Pastel Peanut.stl

Chunky Rey - Star Wars Kit | No Supports, No AMS, No Glue

Earth Brown.stl

Articulated Giant Day Gecko | Pre-Painted + Optional 8mm Glass Eye Version

Giant Day Gecko.stl

 Cute Flexi Pets Sloth (Keychain & Magnet)

Flexy bradipo_magnet.stl

Pumpkin Patch Pal Tea Light Pumpkin Scene

log.stl

Wrinkled Potion Bottles for Resin Printing

Wrinkled Potion Bottle Resin 3.stl

Bidoof Christmas - Pokemon - Fan art

Bidoof xmas.stl

Ghost Pop Beads

These “Ghost Pop Beads” snap together to form spooky chains or rings as long as you want! Use for decoration or to accessorize your costume.

See here for video: https://youtu.be/sqHG2kSpsd8 

The pieces are designed to be printed in “Vase” or “Spiralized” mode. The file is optimized for printing with a 0.4mm nozzle. Printing with different nozzle sizes is still possible but will affect the tightness of fit.

Each piece uses approximately 0.4g of material, making this a great design to use up the scraps of filament you have lying around! A full 1kg roll could print approximately 2500 beads, enough to make a chain 50m (164ft) long!

To connect pieces together, simply pinch the bottom end of one piece to open it up. Insert the oval end of the second piece inside and release. The pieces remain connected but can be separated again if needed. Create long chains or rings by adding as many pieces as you want.

Each piece takes approximately 5 minutes to print. It is, however, much more efficient to print multiple pieces sequentially! Setting up spiralized models to print “one at a time” takes a bit of planning as the pieces must be spaced and sequenced properly so that the hot end or gantry does not collide with the finished prints as it moves on to the next print. 

Make the bottom open by setting “bottom layers” to zero. Good build plate adhesion is essential, so ensure that your machine is well calibrated.

This design is entered in the 2023 HalloweenWearable Contest

Similar Designs: 
Pop Bead Garland: https://social.thangs.com/m/513337 
Skull Pop Beads: https://than.gs/m/943349 


Blue M&M Mascot

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND
***
***Sculpt by @ChelsC423***
I love these guys!  (Whole set ready soon)
***
***If you would like to sell physical objects, please see the Chaos Core Partner tier on our Patreon***
***
If you would like to support me AND receive exclusive to Patron models every month check me out here:
https://www.patreon.com/chelscct

$

Most Downloaded of All Time

Categories

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Trending

Popular

Paid

Videos

New Uploads

Downloads

Rack Driven 7 Segment Display

Multiboard Spray Bottle Holder

Knitted Pumpkin

Teardrop Pod Plain

Chain Link Gridfinity Bin 100mm

Christmas Tree

Gridfinity TS100 soldering iron holder

Judge Dredd (fan art)

Obi-Chunk Kenobi - Star Wars Obi-Wan Kenobi Kit | No Supports, No AMS, No Glue

Chunky Rey - Star Wars Kit | No Supports, No AMS, No Glue

Articulated Giant Day Gecko | Pre-Painted + Optional 8mm Glass Eye Version

Cute Flexi Pets Sloth (Keychain & Magnet)

Pumpkin Patch Pal Tea Light Pumpkin Scene

Wrinkled Potion Bottles for Resin Printing

Bidoof Christmas - Pokemon - Fan art

Ghost Pop Beads

Blue M&M Mascot

Lion Ring

Ferrari F1 2021

JP Defence Fidget Balisong Butterfly Knife