A collection of the things I made for Multiboard.

My Multiboard items

_This is a part created for [Multiboard](https://www.multiboard.io/)._

I created this little holder for my small filing tools. They are about 2mm at the neck and the grip is about 3mm.
The tools can just drop in to the holes. Up to ten can be held.

**My print settings:**

Printer: Anycubic Kobra 2 Max
Material: PLA
Infill: 15%
Infill Type: Gyroid, but probably does not matter
Support: None
Brim: No
Perimeters: 3
Orientation: as provided in the file

Enjoy!

**I am an independent 3D artist. Find out more about me [here](https://www.krazenlabs.com/).**

Multiboard Mini File Holder

file holder.stl

_This is a part made for [Multiboard](https://www.multiboard.io/)._

I am not a huge fan of the multiboard threads, and so I created this variation of the [20mm Big Thread Flat Bolt ](https://thangs.com/designer/Keep%20Making/3d-model/20%20mm%20Big%20Thread%2C%20Flat%20Head%2C%20Bolt-973926)that uses a push fit connector instead to push directly into a snap. The fit is quite tight and forms a relatively secure connection in my setup.

**My print settings:**
- Printer: Anycubic Kobra 2 Max
- Material: PLA
- Infill: 15%
- Infill Type: Gyroid
- Support: None
- Brim: No
- Perimeters: 3
- Orientation: as provided in the file

Enjoy!

_**I am an independent 3D artist. Find out more about me [here](https://www.krazenlabs.com/).**_

Multiboard 20mm Push Fit Bolt

20mm push fit bolt.stl

A bottle holder for my isopropanol spray bottle, compatible with [Multiboard](https://www.multiboard.io/). The bottle has a diameter of 73mm.

This is a remix of this bottle holder: https://makerworld.com/en/models/188533
The changes mostly relate to the dimensions to make it fit my bottle.

**My print settings:**

Printer: Anycubic Kobra 2 Max
Material: PLA
Infill: 15%
Infill Type: Gyroid, but probably does not matter
Support: None
Brim: No
Perimeters: 3
Orientation: as provided in the file
Enjoy!

**I am an independent 3D artist. Find out more about me [here](https://www.krazenlabs.com/).**

Multiboard Spray Bottle Holder

spray bottle holder.stl

_This part was designed for use with a [Multiboard](https://www.multiboard.io)._

This part holds a single LR44 battery. I made it to store the spare battery for my calipers.
It has a big thread and screws directly into a Multiboard tile. I used the threading from the original Big Thread Multiboard Bolt.

**My print settings:**
- Printer: Anycubic Kobra 2 Max
- Material: PLA
- Infill: 15%
- Infill Type: Gyroid, but probably does not matter
- Support: None
- Brim: No
- Perimeters: 3
- Orientation: as provided in the file

Enjoy!

_**I am an independent 3D artist. Find out more about me [here](https://www.krazenlabs.com/).**_

Multiboard LR44 Battery Holder

LR44 Battery Holder.stl

I am an independent 3D artist.

Most of the models I share were created for my personal use.

I also do 3D modelling for Virtual Reality applications. Check out my website for more info and contact information.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

KrazenLabs

Achievements

Trailblazer

Seedling

Debutant

Pinned models

Multiboard 20mm Push Fit Bolt

My Multiboard items

Multiboard Mini File Holder

Multiboard 20mm Push Fit Bolt

Multiboard Spray Bottle Holder

Multiboard LR44 Battery Holder