Cube wave - a side table

Geoshape

Remix Model

Social

Become a member

Makes

Cube wave - a side table - It took 20h per cube using my Prusa mk4 with inputShaper. I added cylindrical legs (40mm width x 30mm height) - 3d model

This model is restricted by licensing terms.

View license.

194 Likes446 DownloadsSeptember 7, 2024

This model is restricted by licensing terms.

View license.

Instructions

Filament • 0.56mm

Layer height0.56 mm

Infill density10 %

SupportsNone

Nozzle size0.8 mm

Infill styleGyroid

Build yourself a sleek and minimalistic side table consisting of two identical pieces stacked on each other. The waveform pattern enables a perfect positioning without the need for additional mounting hardware.

**Size: **240 x 215 x 240 mm

As the pieces are really big I recommend using a 0.8mm nozzle and go high in terms of the layer height. Consumes about 800g per piece. You can print the bottom one with logo. Position the seam in the waveform region.

Recommended settings: 0.8mm nozzle 0.56mm layer height 1 wall 10% gyroid