The Swing retro pendant light is a versatile lamp system with which you can illuminate every room to your specific needs.

Size: Biggest part requires 195x120mm build area

Additional hardware: GU10 socket cable M6x20 flat head bolts M6 hex nut (nyloc recommended) M3x12 bolts zip tie (small) anchor & screws for ceiling installation

General information: inlay black is used that the lights doesn't shine through the main part itself inlay white is used for reflection inside if the main part

Print instructions: Main: 0.16mm or less layer height 2 walls 10% infill

inlay white/black: 0.12mm layer height or adaptive spiral vase 1 bottom layer bottom layer gets cut of after printing

shade: 0.12mm layer height 2 walls for solid: 0% infill; 0 top layers; amount of bottom layers define the dimming for circles: 0% infill, 2 walls for stairs: 8 bottom layers

All other parts use standard print settings.