This is a pumpkin model that can add some color to your mantle during the fall season (or all year round). This also is a very easy multi-color print, no AMS or MMU needed!

**Print Settings**
- Layer height: 0.2-0.3
- Walls: 3
- Infill: 5%-10%

**Multi-color print settings**
- Just add a “filament change at layer height" command where the stem starts in your slicer of choice. This allows you to change the filament by hand, or allow your MMU/AMS to take care of it for you

**Filaments pictured**: Jessie Filament Mystery Orange PLA, Jesse Filament Limer Green PLA



Want to sell this print? Become a member today!

Happy printing!

Halloween Pumpkin Decoration - Easy Color Change

Pumpkin v3.3mf

Just a cute, flexi, print-in-place ghost to brighten up your day! Print this little ghost and put it on your desk, or print it in glow-in-the-dark filament and use it as spooky decor! 

This should be a pretty easy print, no supports needed.

**Print Settings**
- Layer height: 0.16mm - 0.3mm
- Walls: 3
- Infill: 10%

**Want the whole gang like in the last picture?**
- Flexi Skeleton: https://thangs.com/designer/bakedbean3d/3d-model/Flexi%20Skeleton-1138586
- Flexi Cat: https://thangs.com/designer/bakedbean3d/3d-model/Flexi%20Halloween%20Cat-1138587


Want to sell this model? Become a member today!

Happy printing!

Flexi Articulated Ghost Halloween Decoration

Flexi Ghost v2.3mf

Just a fun, articulated, print-in-place skeleton. He's a little confused, but he does his best! He can be posed in many different ways, with a pretty far range of motion in each joint.

**Articulated Points**
- Neck
- Shoulders-to-arms
- Elbows
- Hips-to-legs
- Knees

This should be a pretty easy print, no supports needed.

**Print Settings**
- Layer height: 0.16mm - 0.3mm
- Walls: 3
- Infill: 10%

**Want the whole gang like in the last picture?**
- Flexi Ghost: https://thangs.com/designer/bakedbean3d/3d-model/Flexi%20Ghost-1139768
- Flexi Cat: https://thangs.com/designer/bakedbean3d/3d-model/Flexi%20Halloween%20Cat-1138587


Want to sell this model? Become a member today!

Note: When purchasing this model outside of being a commercial-tier member, this license is for **personal** use only.

Happy printing!

Flexi Articulated Skeleton - Fun Halloween Decoration

Flexi Skeleton v3.3mf

This is a vase inspired by beaded jewelry and pottery, it looks great printed in more organic colors. The filament pictured is PolyMaker PolyTerra Peanut.


**Printing**
- This isn't designed to be printed in vase mode, and I have not tried - you may have trouble with the steeper rounded edges.
- Layer height: 0.2mm
- infill: 5%-10%

**Water prep**
- I would use a sealant to make sure no water seeps into the print. I personally like Gorilla Glue's Waterproof Patch & Seal Rubberized Sealant Spray; Crystal Clear



Happy printing!

Want to sell this print? Become a member today!

Vase - Tribute

Bead Vase V2.3mf


A sleek charging station that supports MagSafe and Apple Watch chargers.

This is a modern, sleek charging station for your MagSafe and Apple devices that looks great even when not charging anything!



**Assembly**

 - Just slot the charging portion onto the base
 - **NOTE**: The tolerance between the pillar and the slot is 0.15mm, this prints and goes together well with my Bambu X1C. 
- If you are having trouble getting the 2 pieces to slot together, please try the “0.2mm” or “0.25mm” models which have a looser tolerance.



**Printing**

- Layer height: 0.2mm - 0.3mm
- Infill: 10%
- Walls: 3
- Support: Organic
  - **Tip**: I'd add a “Modifier” to the “base” of the base model and set infill to 100%
  - This adds some additional weight to the base

**Features**

- VHB tape cutouts on the base
- M5 washer cutouts on the base for you to add weight to the base if you'd like
  - **Note**: I highly recommend you use the VHB tape cutouts on the bottom of the base!

Don't know which MagSafe charger you have? Check out our blog post about it: https://www.bakedbean3d.com/tutorials-and-guides/how-to-tell-which-magsafe-charger-you-have

Happy printing!


MagSafe + Apple Watch Charging Station - Floating Pucks

15W MagSafe Stands.3mf

25W MagSafe Stands.3mf

Apple Watch Stands.3mf

Dual Base.3mf


A sleek charging station that supports MagSafe and Pixel Watch 2/3 chargers.
 
This is a modern, sleek charging station for your MagSafe and Google devices that looks great even when not charging anything! 

**Note**: You will need a "MagSafe" case to use the MagSafe charger if you are not using an iPhone.


**Assembly**

 - Just slot the charging portion onto the base
 - **NOTE**: The tolerance between the pillar and the slot is 0.15mm, this prints and goes together well with my Bambu X1C. 
- If you are having trouble getting the 2 pieces to slot together, please try the “0.2mm” or “0.25mm” models which have a looser tolerance.


**Printing**

- Layer height: 0.2mm - 0.3mm
- Infill: 10%
- Walls: 3
- Support: Organic
  - **Tip**: I'd add a “Modifier” to the “base” of the base model and set infill to 100%
  - This adds some additional weight to the base

**Features**

- VHB tape cutouts on the base
- M5 washer cutouts on the base for you to add weight to the base if you'd like
  - **Note**: I highly recommend you use the VHB tape cutouts on the bottom of the base!

Don't know which MagSafe charger you have? Check out our blog post about it: https://www.bakedbean3d.com/tutorials-and-guides/how-to-tell-which-magsafe-charger-you-have

Happy printing!


MagSafe + Pixel Watch 2/3 Charging Station - Floating Pucks

Pixel Watch 2_3 Stands.3mf

A low-profile, sleek charging stand for your Pixel Watch 2 or 3. This modern charging stand for your Pixel Watch 2 or 3 looks great even without a watch on it!


**Assembly**

 - Slot the charging portion onto the base
 - **NOTE**: The tolerance between the pillar and the slot is 0.15mm, this prints and goes together well with my Bambu X1C. 
- If you are having trouble getting the 2 pieces to slot together, please try the “0.2mm” or “0.25mm” models which have a looser tolerance.



**Printing**

- Layer height: 0.2mm - 0.3mm
- Infill: 10%
- Walls: 3
- Support: Organic
  - **Tip**: I'd add a “Modifier” to the “base” of the base model and set infill to 100%
  - This adds some additional weight to the base

**Features**

- VHB tape cutouts on the base
  - **Note**: I highly recommend you use the VHB tape cutouts on the bottom of the base!


Happy printing!

Want to sell this print? Become a member today!

Pixel Watch 2/3 Charging Stand - Floating Pucks

Smart Watch Base.3mf

A low-profile, sleek charging stand for your Apple Watch. This low-profile, modern, charging stand for your Apple Watch looks great even without a watch on it!


**Assembly**
- Slot the charging portion onto the base
- **NOTE**: The tolerance between the pillar and the slot is 0.15mm, this prints and goes together well with my Bambu X1C. 
- If you are having trouble getting the 2 pieces to slot together, please try the “0.2mm” or “0.25mm” models which have a looser tolerance.



**Printing**
- Layer height: 0.2mm - 0.3mm
- Infill: 10%
- Walls: 3
- Support: Organic
 - **Tip**: I'd add a “Modifier” to the “base” of the base model and set infill to 100%
 - This adds some additional weight to the base

**Features**
- VHB tape cutouts on the base
 - **Note**: I highly recommend you use the VHB tape cutouts on the bottom of the base!


Happy printing!
 
Want to sell this print? Become a member today!

Apple Watch Charging Stand - Floating Pucks

This is a modern, sleek charging stand for your MagSafe devices that looks great even when it's just sitting on your desk. No more tech eyesores! 

Note: While iPhones support MagSafe out of the box, this stand is also compatible with any phone that has a MagSafe-compatible case!



**Assembly**

- Slot the charging portion onto the base
- **NOTE**: The tolerance between the pillar and the slot is 0.15mm, this prints and goes together well with my Bambu X1C. 
- If you are having trouble getting the 2 pieces to slot together, please try the “0.2mm” or “0.25mm” models which have a looser tolerance.


**Printing**

- Layer height: 0.2mm - 0.3mm
- Infill: 10%
- Walls: 3
- Support: Organic
 - **Tip**: I'd add a “Modifier” to the “base” of the base model and set infill to 100%
 - This adds some additional weight to the base

**Features**
- M5 washer cutouts on the base for you to add weight to the base if you'd like
- VHB tape cutouts on the base
 - **Note**: I highly recommend you use the VHB tape cutouts on the bottom of the base!

Don't know which MagSafe charger you have? Check out our blog post about it: https://www.bakedbean3d.com/tutorials-and-guides/how-to-tell-which-magsafe-charger-you-have 


Happy printing!

Want to sell this print? Become a member today!


 MagSafe Charging Stand - Floating Pucks

MagSafe Base.3mf

- 👾 Discord access to chat about what I'm working on, CAD, and 3D printing!
- 🔥 Download **3** of my exclusive designs to **print** per month
   - 1-2 new designs per month
   - Designs range from smartwatch charging stands, to fidget toys, to travel
accessories, so there's something for everyone!


** This is a license to print the physical products, not to sell them. The digital files are NEVER for sharing.

Maker: Limited Personal Plan

- Everything in the previous tier
- 👾 Exclusive **Discord channel** where I will dedicate more time to help you with the following:
   - 📈 **Improving the performance** of your machine, mods, etc
   - 🔨 **Helping you build/plan/troubleshoot** your own Voron, RatRig, etc machine
   - ⚡️ **Helping plan out and conduct electrical work safely and cleanly** on your custom machine (Power supplies, 24/48v setup, smart switches, relays, breakers, MMUs, toolboards, etc.)


**Note**: Attribution required: You must credit at the end of your product descriptions with: "Design licensed by BakedBean3D on Thangs."

** This is a license to print and sell the physical product. The digital files are NEVER for resale or sharing. These commercial privileges are only valid for active subscribers. If your subscription ends, you must remove your listings until your membership is renewed.

Builder: 3D Printer Performance Seekers and Builders

- Everything in the previous tier
- 💰 Access to sell any of my free designs that have the "CC BY-NC-ND 4.0" license 
- 🔥 Get access to **all** of my exclusive designs to **print and sell**
   - Seasonal designs as well as year-round designs!


**Note**: Attribution required: You must credit at the end of your product descriptions with: "Design licensed by BakedBean3D on Thangs."

** This is a license to print and sell the physical product. The digital files are NEVER for resale or sharing. These commercial privileges are only valid for active subscribers. If your subscription ends, you must remove your listings until your membership is renewed.

Seller: Full Commercial Plan

This stand was designed to fix an issue with Pixel Watch 2 and 3 chargers, which is that you have to orient the watch a certain way to charge. 

**Features**
• **Compatible with Pixel Watch 2 & 3**: Designed to fit both watches seamlessly.
• **Anti-slip bumper integration**: Supports 6x2mm rubber bumpers for increased stability
• **Flexible Charging Orientation**: Charge from either bezel side for maximum convenience.
• **Integrated Cable Management**: Keep your charging cable hidden and tidy.

• **Easy to Print**: Supports organic support structures for hassle-free printing.



Note: When purchasing this model outside of being a commercial-tier member, this license is for **personal** use only.

Happy printing!

Cliff Hanger - Pixel Watch 2 & 3 Charging Stand | Flexible Orientation & Cable Management

Cliff Hanger - Pixel Watch 2 16.3mf

Check out this retro-inspired headphone stand!

This unique model replicates the vintage charm of old TV antennas and is available in two sizes for small and medium-sized headphone headbands.

This functional addition to your workspace or home is ideal for users of Sony WH-1000XM5 headphones, as depicted in our images. However, please note that the sizes might not accommodate Apple AirPods Max. 

**Features**
Designed with practicality in-mind, these models have built-in space for VHB tape at the bottom, allowing you to fix them securely to any surface. 

Assembly is made easy with super glue that can strongly bond the two parts together. 

**Printing**
To ensure the best result when 3D printing this headphone stand, use the following settings
- 3 walls
- 3 top/bottom
- 10+% infill. 

Note: When purchasing this model outside of being a commercial-tier member, this license is for **personal** use only.

Happy printing!

Headphone Holder - The Antenna

Antenna headphone holder - Medium v7.3mf

Antenna headphone holder - Small v3.3mf

This is a smiling pumpkin that can brighten up your mantle during the fall season (or all year round). This also is a very easy multi-color print, no AMS or MMU needed!

**Print Settings**

- Layer height: 0.2-0.3
- Walls: 3
- Infill: 5%-10%

**Multi-color print settings**

- Just add a “filament change at layer height" command where the stem starts in your slicer of choice. This allows you to change the filament by hand, or allow your MMU/AMS to take care of it for you

**Filaments pictured**: Jessie Filament Mystery Orange PLA, Jesse Filament Limer Green PLA


Want to sell this print? Become a member today!

Note: When purchasing this model outside of being a commercial-tier member, this license is for **personal** use only.

Happy printing!

Smiling Pumpkin Halloween Decoration - Jack-O-Lantern - Easy Color Change

Smiley Pumpkin v6.3mf

This is a retro Apple Watch stand reminiscent of old-school CRT monitors, designed to be easy to print with minimal support! Great for a desk or bedside table to give it a bit of a nostalgic vibe.

It has cutouts on the bottom for VHB tape if you want to secure it to your desk or nightstand.

**Printing**
- layer height: 0.2mm-0.3mm
- Infill: 10%
- Walls: 3
- Supports: Under the brim where the Apple Watch charger sits



Want to sell this print? Become a member today!

Happy printing!

Retro Apple Watch Charging Stand

Retro Computer Apple Watch Charging Stand.3mf

- Creating fun and functional designs
- Writing guides to make 3D printing easier for everyone
- Modding my printers and exploring the bleeding edge of 3D printing hardware and software 🚀

Use my code: **BB3D50** for 50% off your first month!

Happy printing!


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

bakedbean3d

Achievements

Sapling

Fan Favorite

Traveller

Pinned models