This is the large version of my low-poly pumpkin model. It makes great decor for Halloween and Fall Lovers. It has a cavity and hole in the rear to allow the addition of lights to turn the pumpkin into a proper Jack-O-Lantern. -Note this pumpkin comes in multiple versions. -One where you can print the main pumpkin in vase mode at the same time and filament (at the cost of rigidity). This version of the model will have a cylinder shape in the back due to the slicing of vase mode and can be cut off later. -One where the pumpkin is printed like a normal model -And there are also two versions of the lid one with the stem attached and one where it fits into place as a second print. This is for anyone who want to make their pumpkin with a brown stem but lacks ams.

🚨🚨🚨🚨🚨🚨

This model is for personal use only. If you want to sell physical prints of our designs, or you want to support us, please SUBSCRIBE TO OUR THANGS MEMBERSHIP PLAN : https://than.gs/u/161490?plans=true

🚨🚨🚨🚨🚨🚨

Print Settings: Vase mode enabled if you use the appropriate pumpkin model For all: .1 - .2mm layerheight supports enabled only for the lip on the lid of the pumpkin not the stem or body