tracking pixel
Roy B

Large Low-Poly Pumpkin

by
RWBDesigns
Follow
Follow
Remix Model
RWBDesigns
RWBDesigns
|
Image 1 of 5
Large Low-Poly Pumpkin 3d model
RWBDesigns
RWBDesigns
|
Image 1 of 5
Large Low-Poly Pumpkin 3d model
2D
3D
Makes
Large Low-Poly Pumpkin 3d model
Large Low-Poly Pumpkin 3d model
Large Low-Poly Pumpkin 3d model
Large Low-Poly Pumpkin 3d model
Large Low-Poly Pumpkin 3d model
This model is restricted by licensing terms. 

This is the large version of my low-poly pumpkin model. It makes great decor for Halloween and Fall Lovers. It has a cavity and hole in the rear to allow the addition of lights to turn the pumpkin into a proper Jack-O-Lantern. -Note this pumpkin comes in multiple versions. -One where you can print the main pumpkin in vase mode at the same time and filament (at the cost of rigidity). This version of the model will have a cylinder shape in the back due to the slicing of vase mode and can be cut off later. -One where the pumpkin is printed like a normal model -And there are also two versions of the lid one with the stem attached and one where it fits into place as a second print. This is for anyone who want to make their pumpkin with a brown stem but lacks ams.

🚨🚨🚨🚨🚨🚨

This model is for personal use only. If you want to sell physical prints of our designs, or you want to support us, please SUBSCRIBE TO OUR THANGS MEMBERSHIP PLAN : https://than.gs/u/161490?plans=true

🚨🚨🚨🚨🚨🚨

Print Settings: Vase mode enabled if you use the appropriate pumpkin model For all: .1 - .2mm layerheight supports enabled only for the lip on the lid of the pumpkin not the stem or body


28 Likes28 DownloadsAugust 11, 2023


28 Likes28 DownloadsAugust 11, 2023
This model is restricted by licensing terms.