THIS IS THE LAST PART OF THE HALLOWEEN DECORATION SERIES FOR 2024! As Halloween is in a few days, I thought it would be a great idea to offer the opportunity to buy all my Halloween models in a bundle pack so... here it is!
This bundle will include the following models:
-Halloween jack o' Lantern -Skeleton hand decoration -Halloween skull bone mask -Rest in print Halloween coasters
Personally this is a great opportunity if you liked any of my previous models and you were not sure if to buy it or not. Well, I hope that with the extra models you will receive you make up your mind and end up getting it!
All models are carefully designed and printed in order to meet quality criteria (as always with all of my models) so just hit print and you will have them soon enough!
If you want to see the designs in action Click the link ▶️: https://www.instagram.com/printplay.3d/?hl=en
Drop a like💜, comment 💬 it really helps us creators to get more done :D
Buying this model does not grant access to sell it commercially, just for PERSONAL USE!
Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/
**3D printing settings for all models:**MODEL: JACK O' LANTERN
MODEL IS NOT SCALABLE, LEAVE IT AS IT IS FOR FITMENT ISSUES WITH THE MAGNETS!
Layer height: -0.2 mm is perfect
-SUPPORTS ARE NEEDED FOR ALL OF THE MODELS. I used the basic Bambulab tree supports and has all turned out to be perfect.
-No extra adhesion to the bed is needed
-Infill: 10% in order to end up with a rigid piece. Less could break the piece when adding the magnets.
POST PRINT:
The magnets do not need to be glued in, just press them with the pointy end of the pliers that came with your printer!
MODEL: SKELETON HAND DECORATION
-MODEL SCALABLE! Current Scale works very good to hold the Jack-o-Lantern so keep that in mind!
Layer height: -0.2 mm is perfect
-SUPPORTS ARE NOT NEEDED FOR ANY OF THE MODELS
-No extra adhesion to the bed is needed
-Infill: 10% in order to end up with a rigid piece
MODEL: SKULL BONE HALLOWEEN MASK All the files are scaled for a "standard adult head" but in case you need to scale there is still space on the buildplate to make it a big bigger.
Layer height: -0.2 mm is perfect. You could go for lower layers for extreme detail or use the Adaptative layers from bambulab to have best of both worlds
-SUPPORTS ARE NEEDED. They are already ready for all files but you can check and optimize as I used the Standard Tree support (that, in my opinion, work amazingly good)
-Adhesion is needed to print the teeth but, as the support, is already coded in the STLs
-Infill: between 5 - 10% is more than enough. I printed mine with 5%
MODEL: REST IN PRINT COASTERS Layer height:
-0.2 mm is perfect for this print.
-SUPPORTS ARE NOT NEEDED.
-Adhesion is also not needed
-Infill: between 5 - 10% is more than enough. I printed mine with 5%
In case of stringing due to a lot of filament change you can use a blowtorch post print to eliminate the residue of plastic and enhance the final look!