tracking pixel
Printplay3d

REST IN PRINT HALLOWEEN COASTER COLLECTION

by
Printplay3d
Follow
Follow
Remix Model
Printplay3d
Printplay3d
|
Image 1 of 5
REST IN PRINT HALLOWEEN COASTER COLLECTION 3d model
Printplay3d
Printplay3d
|
Image 1 of 5
REST IN PRINT HALLOWEEN COASTER COLLECTION 3d model
2D
3D
Makes
REST IN PRINT HALLOWEEN COASTER COLLECTION 3d model
REST IN PRINT HALLOWEEN COASTER COLLECTION 3d model
REST IN PRINT HALLOWEEN COASTER COLLECTION 3d model
REST IN PRINT HALLOWEEN COASTER COLLECTION 3d model
REST IN PRINT HALLOWEEN COASTER COLLECTION 3d model
This model is restricted by licensing terms.Β 

WELCOME TO HALLOWEEN DECORATION PART 4!

πŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒπŸŽƒ

Today I bring another Coaster upgrade, the REST IN PRINT COASTER COLLECTION!

This print will ensure a great look for the coasters that you can use during your Halloween events happening soon!

The print contains 8 different designs that will give the extra touch. My personal favorites are the pumpkin ones, they are amazing😍

In terms of printing this is a super simple print that will need assembly. You just have to glue the tomb to the storage container.

This was printed using the following polymaker filaments:

-Lava red -Sunrise Orange -Charcoal Black -Cotton White -Fossil Grey

As always, amazing results with this filament. You can't go wrong when using them! If you have not tried them you have to, you will not be disappointed!🫢🏽

I hope you like it and if you do be sure to drop a like and a follow. More models coming out later on this week!✨ Do not hesitate to drop a follow because A LOT MORE MODELS ARE COMING SOON!!

If you want to see this design in action Click the link ▢️:

Drop a likeπŸ’œ, comment πŸ’¬ it really helps us creators to get more done :D

Buying this model does not grant access to sell it commercially, just for PERSONAL USE!

Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/

RECOMMENDED SETTINGS

Layer height:

-0.2 mm is perfect for this print.

-SUPPORTS ARE NOT NEEDED.

-Adhesion is also not needed

-Infill: between 5 - 10% is more than enough. I printed mine with 5%

In case of stringing due to a lot of filament change you can use a blowtorch post print to eliminate the residue of plastic and enhance the final look!


2Β Likes0Β DownloadsOctober 23, 2024


2Β Likes0Β DownloadsOctober 23, 2024
This model is restricted by licensing terms.Β