.jpeg&w=3840&q=75)
.jpeg&w=3840&q=75)
ARTICULATED BUTTERFLY
Here you will find 2 different STLs. One for the big butterfly (the wings are bigger) and a different one for the smaller version (wings are scaled down for a more cute look ;) ).
Buying this model does not grant access to sell it commercially, just for PERSONAL USE!
Any question regarding the model can be sent to my Instagram: https://www.instagram.com/printplay.3d/
YOU FILL FIND THIS MODEL ON MY COMMERCIAL LICENCE MEMBERSHIP. ONLY WHEN THIS MEMBERSHIP IS ACTIVE YOU WILL BE ABLE TO SELL THIS MODEL YOURSELF
3D printing settings MODEL IS SCALABLE but check the slicing before printing to ensure the scale is enough to not fuse the articulations together (can end up happening if you scale down too much).
Layer height: here you have different options, all of them could be used: -0.2 mm for a "not so detailed" final print. Use this only as final resource.
- 0.08 mm for a super detailed final print. This is the one I usually chose. -You could also use the adaptative layer height on BambuStudio to combine the best of both worlds
NO SUPPORTS NEEDED!
Adhesion: I used a brim to prevent Warping but you should be safe without it.
Infill: 10% is more than enough.