A tiger with a bit of a dragon flair! This design has been on my mind for quite a long time now and Its finally done! ^_^

They're designed to print mostly in place (the head peg and tail will need to be glued into the body) and as usual NO supports are needed.

There are 2 head options that can be swapped out for which ever look your going for. I've also included multi color .3mf files for those that have the capability. There are also 2 patterns to choose from. The traditional tiger look and one that I had some fun with. That one has 2 options so that you can change the fur color.

The white one was hand painted with acrylics and the orange one was printed on a bambu p1p with ams.

• Updated to include a version with the body and tail combined. Make sure to print this version at 100% or larger (It is set to 75% of the original versions size) !

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.

Happy Printing!!