Patchwork Teddy Bears

The teddy bear prints in a few pieces. The back of the head and body will need to be glued into the main body. There are pegs to help keep it in place while it is drying. Make sure to print 2 of the pegs.

Has a solid back version that can be personalized by adding a negative volume/part in the slicer for different magnet or jump ring sizes.

The painted .3MF file is included, but you can change up the paint however you'd like!

Recommended that it is printed at 100% or larger.

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.

Happy Printing!!