Griffin Prints in 5 pieces, the wings just need to be pressed into the joints on the back once printed. I left the wings a bit loose, but you can scale them up a bit if you want them to hold their pose better. There are 2 neck pegs, one is for gluing in place.

Test printed at 85% and 160%.

Two painted .3MF files are included, but you can change up the paint however you'd like!

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon, Thangs or Tribes memberships.

Happy Printing!!