Puffling Coop and Fence

There are 4 pieces for the puffling coop: Coop, Roof, Plank, Pillars. Print 4 of the pillars and then glue them into the bottom of the coop. The roof can be glued down or left as access area to the pufflings.

There are 2 pieces for the fence: Middle and Corner. To make a square fence, print 4 corner pieces. To make a rectangle, print 4 corner pieces and 2 middle pieces. If you wish to make a larger square, print 4 corner and 4 middle pieces. Will need to be glued together.

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.

Happy Printing!!