Jinx This halloween cat plushie prints in a few pieces that will need to be glued together. The peg (print 2 of them) helps keep the pieces in place while the glue dries.

Come with a magnet version that uses a 10x2mm magnet that will need to be glued in place. The magnet on the painted file is added as a negative part which can be clicked on and moved around to your preference.

Also has a solid back version that can be personalized by adding a negative volume/part in the slicer for different magnet or jump ring sizes.

A painted .3MF file is included. But you can change up the paint however you'd like!

Recommended that it is printed at 100% or larger and the magnet version at 100%.

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.

Happy Printing!!