I decided to start a cryptid series but make them cute and this Mothman (mothboy?) is the start to the Chibi Cryptid series.

Because I couldn't decide which looked better, it has a small and large set of wings to choose from. 😆 I used the smaller ones for the photos. Once printed they will need to be glued into the back.

General Settings : ◽️ Print-in-place. No supports needed! ◽️ 3+ perimeters (the more the stronger it will be). ◽️ Inner before outer wall. ◽️ Slow down outer wall speed. ◽️ 0.2 maximum layer height. 0.1 for best detail. ◽️ 15%+ infill. ◽️ Enable bridging. ◽️ Make sure to have good bed adhesion or use a brim! Made for FDM printing.

Please feel free to share images of your prints, I would love to see what you do with them! ^_^

All MysticSaige models are for personal use only. You may never alter, redistribute or sell my files in any way.

If you are interested in selling 3D Prints of my models, you may acquire a commercial license and other perks through my Patreon or Tribes memberships.

Happy Printing!!