LoftedGoods28K followers

Square Tapered Planter

184 downloads · 2 months ago · A highly requested square planter that is compatible with [The Vertical Rail](https://thangs.com/des

Description

A highly requested square planter that is compatible with The Vertical Rail, The Horizontal Rail, The Tripod Rail, and my original command strip wall mount.

Previous versions of this style of planter required an inner pot that nested into the outer pot. In order to save time and filament, I've updated the pot to have a small drainage tray that is inserted into the bottom of the pot.

Supports A very small amount of tree supports are recommended for the flat part of the dovetail on the back of the planter.

Scaling I wouldn't recommend scaling the dovetail mounted versions since they are meant to fit with my universal dovetail system. The tabletop versions can be scaled however you like.

Orientation

Everything prints upright with its bottom on the build plate
The wall mount prints flat with the sliding dovetail facing up

Print Settings

.2mm layer height
15% grid infill | 15% gyroid infill for wall mount
2 walls
Set bridge flow to 1.6 for drip tray and wall mount

Filament

Bambu Lab Matte PLA

Colors I used:

Terracotta

Hardware

Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://linktr.ee/loftedgoods

Tags:

Discussions

demonic12102 months ago

The drainage tray diameter is smaller then where its supposed to sit in the square pot. Is there an updated STL file for it?

LoftedGoods2 months ago

Shoot you're right! I had scaled it down a bit to see if I could nest it inside the pot and forgot to undo that before uploading. Just updated the file if you want to redownload. Or, like sarahmhcoupons said, you can simply scale the drainage tray to 100%. Sorry about that!