Charles Planter
Update: Added another drip tray that allows water to drain into the open tray.
A planter/jewelry tray combo! The planter twists off to reveal a drip tray, allowing your plant to have proper drainage while keeping it hidden.
I used a fuzzy skin on this one, but it looks great without it too. The fuzzy skin settings (and all other settings) are included in the 3mf.
Supports None needed!
Scaling Can be scaled, but the twist lock may not click as well if it's scaled too large.
Orientation The planter and tray should have their bottoms on the build plate.
Print Settings .2mm layer height 15% gyroid infill 2 walls
Filament & Hardware Filament: Bambu Lab Matte Dark Blue PLA
Filament and non 3D printed items for this model can be found on my Amazon Storefront, linked here: https://hendricks.design/links/
Charles Planter
Square Bubbles Planter
Plastic Bag Dispenser
Heywood Wall Planter v2
Square Tapered Planter
Catchall for The Horizontal Rail
Sunglasses Holder for The Horizontal Rail
Shelf for the Horizontal Rail
The Rail - Coat Hook
The Horizontal Rail
Scales Planter with Hidden Drip Tray
The Rail Tripod V2
Tripod Lamp
The Rail - Tripod Attachment
The Rail - Ira Planter
The Rail - Storage Bins
Wall Planter with Hidden Drip Tray - LG03
The Rail - Hook Attachment
The Rail - Grow Light Attachment
The Rail v2
I'm not seeing fuzzy skin settings in Orca or Bambu studio..
To add the fuzzy skin you go to "others" and under special mode you can click on fuzzy mode.
There's other settings under the fuzzy mode and measurements for fuzzy skin point distance and fuzzy skin thickness. Any recommendation here?
Please can you tell me why I’m not getting the fuzzy finish when printing the 3mf file even in Bambu studio it’s not showing fuzzy finish
I believe these .3mf files were created in OrcaSlicer, a very similar slicer to Bambu Studio. While the files are cross-compatible, some of the options saved in the file don't show up when opened in the other app. To see the options as the designer intended, open these files in OrcaSlicer.
(Brian might consider mentioning this in future posts.)
I’m printing the 3mf file now and have no fuzzyness???
I am paying and I cannot download anything from your bi models nor do I receive any help of any kind, I even write to you on Instagram and neither