The Tacktus

Would you Like to add some desert charm to your desk? got tacks lying around? Well why not solve both these problems with The Tacktus! That's right, as the name suggests, this stylish succulent doubles as a tack holder! With room on the outside for 24 individual wall tacks and even more space on the inside of the removable pot, you will never have to worry about your tacks going missing ever again.

Printing notes: This is a 3 part print containing the Top cactus, the Sand, and the Pot. A well tuned machine should have little issues printing the pin holes for the tacks, however if there is issues, grab a lighter and heat the end of a tack to melt any plastic that may have drooped into the holes. Additionally the Top and Pot will screw together, the threads are designed with a 0.3mm clearance on either side resulting in a 0.6mm tolerance all around. If your printer is well tuned, this shouldnt be a problem, but some sanding could be necessary if not. Also I used organic supports for the Top So the threads could be properly supported, **you may have to put a support blocker on the pin holes **

Additional Notes: -I printed the Pot with a slight fuzzy skin (in White PLA) then painted it terracotta colored to make it look realistic! Also if you add some Baking powder to your paint, it gives it the terracotta-like feel! (I used about .5oz baking powder of every 1oz of paint) -I have attached the Fusion File and a STEP File if you would like to make any changes! --3D Entrepreneurs if you would like to sell this product then by all means please do so!